Motoblock MTZ-05 Attachments. Description

Motoblock MTZ and its purpose

The MTZ walk-behind tractor, or in other words Belorus 05, is one of the first walk-behind tractors produced by the Minsk tractor plant. Production of such equipment continued until the beginning of 1992, after which it was suspended and finally ended. The MTZ consists of a chassis with two wheels, which has a reversible steering bar, as well as a single-cylinder engine and power train.

This device can be characterized exclusively as agricultural equipment, with which you can easily:

• mow the grass;
• perform harrowing;
• hill up some vegetables: potatoes, beets;
• plow light soil;
• transport small items and cargo.

This model can be used to cultivate such small plots of land as vegetable gardens, various gardens, as well as areas located near estates, schools, and houses.

Adapter for Installing the Engine on the Mtz Motoblock

Motoblock MB-2M. This is a real workhorse. Reliable, undemanding, with a massive lifan engine. analogue of Honda. The main advantage of this walk-behind tractor is that it is compatible with all the attachments that come with our Russian walk-behind tractors. For example, if you decide to replace your old walk-behind tractor Neva, Salyut, Kadvi, Cascade with a new walk-behind tractor MB 2m, then you do not need to take additional attachments and attachments; you use what’s left of the old walk-behind tractor. Thanks to the universal hitch, and also to the massive and reliable engine, the walk-behind tractor is not at all difficult; it can be combined with a cart and moves quite quickly. It is also beneficial to operate a walk-behind tractor with an adapter and a rotary mower. this gives a huge main advantage of gaming slots: you do not need to follow a walk-behind tractor across the field, winding up exhausting kilometers. With all the obvious advantages and disadvantages of this unit. The walk-behind tractor is also very reliable. More than 3 years of sales of the MB 2m walk-behind tractor throughout Russia have shown that it is extremely reliable and capable of working and not even letting its owner down in the most difficult weather and physical operating conditions. The highest maintainability of the MB-2m walk-behind tractor cannot be underestimated. The service specialists of our company always keep the required number of spare parts and consumables in stock. Therefore, you always have no doubt that if something suddenly happens to your reliable assistants, then with us you will find competent professionals who are always ready to come to the rescue and make sure that your equipment does not stand idle, but works and makes a profit, gives you a good mood and satisfaction the feeling of not only spent, but firmly invested.

Tags: Adapter for installing a motor on a MTZ walk-behind tractor

READ How to Assemble a Screwdriver Gearbox

walk-behind tractor MTZ 05. install diesel engine

A set of parts for installing a motor on a walk-behind tractor MTZ-05 and other earlier models. catalog/motoblo.

14 Mar 2020 What to do if the engine of an old MTZ 05, 06, 12 walk-behind tractor has arrived. For installation you will need an adapter plate and a brand new hub. From the old motor we remove the original adapter that is in place.

I think you are thinking wrong. I'm sure. Let's discuss. Write to me in PM, let's chat.

I agree, this amazing idea will come in handy

I'm sorry, but unfortunately this doesn't fit. Are there other options?

Nothing to say. keep silent so as not to clutter the topic.

Something is happening here. Thank you for your help here, I won't make that mistake now.

Source

What should you pay attention to when purchasing a “Belarus 05”?

If you want to purchase a similar model of transport device, then you should pay attention to the following spare parts for the MTZ walk-behind tractor:

1. Gearbox - the reliability of the entire device and its service life will depend on its design. If the walk-behind tractor is equipped with a non-removable gearbox option, then if it malfunctions, you will be forced to purchase new equipment, because it will no longer be possible to repair this vehicle.
2. Engine. The engine is an integral part of this type of technology. The motor resource, as well as the power and strength of the unit itself, depend on this element.

Which units and parts of MTZ have to be changed more often than others?

The design of MTZ mechanisms is characterized by increased wear resistance, but still it also has components and assemblies, problems with which can be considered typical. Like any self-propelled mechanisms, these are:

• Engine problems;
• Transmission problems;
• Clutch problems;
• Problems with gear shifting;
• Problems with the chassis;
• Problems with attachments.

The championship in replacing important components, of course, belongs to the engine. Moreover, it is not at all necessary that the owner wants to change the engine because it is unusable. MTZ walk-behind tractors have unique mechanisms in this regard: the lightest model - 06 - weighs 95 kg and belongs to the class of medium-heavy walk-behind tractors. The remaining models weigh much more than a hundredweight: the “old man” 05 weighs 135 kg, the 08, 09 and 12 MTZ weigh 170 kg, which allows them all to belong to the heavy class. Therefore, replacing the engine on an MTZ walk-behind tractor is often caused not by its breakdown, but by the owner’s desire to obtain a more powerful walk-behind tractor from a weaker one at minimal cost.

Replacing the engine on the 05 Belorus

The Lifan engine is quite simple in its design and design; it runs perfectly on regular gasoline and does not require special costs or effort. The main and main advantage of this part is the availability of spare parts, as well as components necessary for repair work.

There is often a situation when one engine malfunctions and requires urgent replacement. Many are lost and do not know how to efficiently and correctly replace the engine on an MTZ walk-behind tractor. And it’s quite easy to do.

More and more often, people are starting to use walk-behind tractors at home and are experiencing breakdowns. Since it is now quite difficult to find Soviet-made spare parts, owners are forced to purchase and install modern or foreign models. The question arises: how to replace the engine on a MTZ walk-behind tractor with an imported one?

And here you should act according to the following plan.

1. Replacing the engine begins with carefully disconnecting the gas cable, as well as the magneto wire, after which it is necessary to remove the fuel tank.
2. Drain all existing oil.
3. Disconnect the required part from the gearbox by unscrewing the 6 bolts connecting the gearbox to the engine itself.
4. Next, install the Lifan engine and (if necessary) fill in the required amount of oil. For fastening you need to buy a new plate with a hub, cable and bolts.
5. Check the condition of all parts.
6. Connect the part being installed to the gearbox and install a new gasket. Tighten the bolts tightly. Install the cable.
7. Connect the wire used for ignition and screw on the stand.
8. Start the device, adhering to all the rules.

Engine models for MTZ walk-behind tractors

Over the entire period of production of walk-behind tractors, the Minsk Tractor Plant has mastered a whole line of devices for this purpose. This included MTZ with markings: 05, 06, 08 and 12. Later, Belarus was added to them - 09N. The numbers characterize the power of the units in horsepower (0 is not taken into account).

One of the engines for domestic walk-behind tractors was the UD-2, which was developed in Ulyanovsk. This is a four-stroke gasoline unit with two cylinders. The total volume is 0.6 cubic meters. cm and power 8 l. With. The engine develops 3000 rpm. Dry weight is 72 kg.

The next model is UD-4. This engine has 4 cylinders and a total volume of 1220 cc. see its feature - the lower location of the valves.

UD-15

The MTZ-05 walk-behind tractor received a UD-15 gasoline engine. This is a four-stroke, single-cylinder, air-cooled unit. Working volume – 245 cubic meters. cm. Its power is 5 liters. With. The engine is capable of producing 3 thousand revolutions and weighs 41 kg. This motor is most often used on domestically produced walk-behind tractors and homemade ones. It is easy to maintain and it is quite easy to obtain the necessary spare parts for it.

Unlike the previous model, UD-25 contains two cylinders. The working volume reached 490 cubic meters. cm, which made it possible to increase power to 8–10 hp. With. The unit weighs 52 kg.

MTZ-09N walk-behind tractors are equipped with foreign-made gasoline units. This is the Honda GX270, its Chinese counterpart is the Lifan LF177 and Kipor KG270. The Japanese engine runs on gasoline. Has 1 cylinder. Working volume – 269 cubic meters. cm, which allows you to get 9 liters. With. power.

Honda GX270

Not long ago, MTZ walk-behind tractors received a diesel unit. It was produced thanks to the joint efforts of Belarus and China. The model received the marking DD-12. The engine has a four-stroke circuit and includes 2 cylinders. The unit develops a power of 16 hp. With. Starting is done using an electric starter. The kit includes a twelve-volt generator.

How to make a mini tractor from a MTZ 05 walk-behind tractor - do-it-yourself modernization

Since this unit is no longer produced, many are trying to convert it into a mini tractor. This design will increase the functionality of the unit and make it more convenient for the owner. Now on the market or in many online stores you can find complete sets of all the parts for converting a walk-behind tractor. This kit also includes step-by-step instructions that will help you with your work. All you need is electric welding, wrenches and plumbing tools. So if you have technical knowledge and skills, you can easily make this modification of your walk-behind tractor into a minitarctor.

If you decide to remake the MTZ-05 yourself, then the first problem you will encounter is that the center of gravity of such a unit is shifted to the front. How to get rid of it:

• We put the unit into operating mode with a mower.
• We dismantle the front part.
• In place of the front we install the steering with the wheel.
• We attach the adjusting rod in the zero niche.
• We weld the mount for the driver's seat.
• We weld a separate platform for the battery and hydraulic distributor.
• At the rear we install a frame for the hydraulic system.
• We install the brake on the front wheel.

As for spare parts for the MTZ walk-behind tractor, the question arises: what are the spare parts for such a design? Here, in principle, everything is simple, the seat will fit from any car, or from the back of a tractor, etc. The wheels are quite suitable from a motorcycle; car wheels, for example, can also be suitable.

With the help of such a simple design we will get a full-fledged three-wheeled mini tractor. Also, a modernization could be converting Belarus into a snow blower, or equipping it with an adapter. Such designs can be made with your own hands; there are many diagrams on the Internet on how to do this.

Remember that in order for the walk-behind tractor to serve you for many years, you should adhere to all the conditions of the operating instructions. First of all, you need to regularly diagnose the unit, at least once a week. Disassemble the equipment and see if all parts are functioning normally, and regularly change the oil. If you find any problems, then you should consult the repair manual. There you will find a detailed description of how to replace the engine, disassemble the clutch, what is needed to adjust the clutch, how to clean the spark plugs, etc. If you doubt that you can put the unit into operation, then simply take it to a service center.

Specifications

MTZ-08

Technical parameters of model 08:

To connect additional equipment, a special coupling is provided in the design.

On the top cover of the housing there is a steering-type rod, on which the controls for the walk-behind tractor are located. The power transmission of a walk-behind tractor consists of a clutch, gearbox, main gear, differential and final drives.