Gas regulator on a walk-behind tractor

Motoblock Profi 1030 8.5 hp VIP

Motoblock PROFI 1030 8.5 hp.
The modern PROFI 1030 walk-behind tractor is designed to perform a wide range of work: harrowing, inter-row cultivation, soil plowing. The cultivator belongs to a new generation of agricultural equipment and can be used by both professionals and amateurs. A four-stroke engine with 8.5 horsepower makes the PROFI even more reliable. The special shield of the working cutters guarantees the operator’s protection during the cultivation process from dirt, lumps of soil and stones. The universal walk-behind tractor is very economical, as it consumes little gasoline. The spacious fuel tank allows you to work continuously without being distracted by refueling. Powerful pneumatic wheels measuring 6.5x12 increase the stability of the cultivator. The high tire tread allows you to use the reliable PROFI 1030 walk-behind tractor as a tractor. The balance of the handle and the weight of the drive creates comfortable conditions for the driver during operation. The ability to adjust “for the operator” adds convenience in cultivating the land. If necessary, the handles can be moved to the side. This way you will walk to the side of the cultivator and not trample the previously cultivated soil.

High-performance universal walk-behind tractor

-Differentials for easy turning and maneuvering

-Headlight for work in the dark

— Four-stroke gasoline engine with 5 bypass channels;

— Decompression valve for easier starting;

— Effective anti-vibration system;

— Well-thought-out, optimally convenient gas outlet;

— Inverter, for quickly changing the direction of movement;

— Pneumatic wheels with agricultural tread and Chevron tires

provide high maneuverability of the vehicle;

— Dry clutch with manual control does not require complex maintenance;

— Patented simplified launch system;

— Possibility of adjusting the handle height;

— Effective anti-vibration system;

Engine: petrol 4-stroke.
Power: 8.5 hp
Engine capacity: 203 cc cm.
Cooling: Air.
Cultivation width: 900-1200 mm.
Cultivation depth: 150-300 mm.
Pneumatic wheels: 6x12 or 7x12
Number of speeds: 3/1.
Gas tank volume: 6 liters.
Consumption: 1 l/h.
Dimensions: 1800x850x1350 cm.
Weight: 120 kg.
Start type: manual.
Warranty: 24 months.

Walk-behind tractor PROFI 1030 8.5 hp VIP - SUPER PRICE -1760r

— The walk-behind tractor itself — MP-480 trailer — Plow — Hiller — Cultivating cutters (cultivator) — Universal hitch — Rubber wheels with SD tread — Operating instructions in Russian — Warranty card — Tool set

Walk-behind tractor PROFI 1030 8.5 hp Standard - SUPER PRICE -1155r

— The walk-behind tractor itself — Plow — Hiller — Cultivating cutters (cultivator) — Universal hitch — Rubber wheels with SD tread — Operating instructions in Russian — Warranty card — Tool set

Walk-behind tractor PROFI 1030 8.5 hp Premium - SUPER PRICE -1095 RUR

— The walk-behind tractor itself — Cultivating cutters (cultivator) — Universal hitch — Rubber wheels with SD tread — Operating instructions in Russian — Warranty card — Tool set

Bobruisk Baranovichi Borisov Baran Beloozersk Bereza Berezino Berezovka Braslav Brest Buda-Koshelevo Bykhov Vasilevich Verkhnedvinsk Vetka Vileyka Vitebsk Volkovysk Volozhin Vysokoe Gantsevichi Glubokoye Gomel Gorki Town of Grodno David-Gorodok Dzerzhinsk Disna Dobrush Dokshitsy Drogichin Dubrovno Dyatlovo Yelsk Zhodin about Zhabinka Zhitkovichi Zhlobin Zaslavl Ivanovo Ivatsevichi Ivye Kalinkovichi Kamenets Kirovsk Kletsk Klimovichi Klichev Kobrin Kopyl Kossovo Kostyukovichi Krichev Krupki Lepel Lida Logoisk Luninets Lyuban Lyakhovichi Mozyr Malorita Maryina Gorka Mikashevichi Minsk Miory Mogilev Molodechno Bridges Mstislavl Myadel Novopolotsk Narovlya Nesvizh Novogrudok Novolukoml. Orsha Osipovichi Oshmyany Pinsk Polotsk Petrikov Postavy Pruzhany Rechitsa Rogachev Svetlogorsk Svisloch Senno Skidel Slavgorod Slonim Slutsk Smolevichi Smorgon Soligorsk Old Roads Columns Stolin Tolochin Turov Uzda Fanipol Khoyniki Chausy Chashniki Cherven Cherikov Chechersk Shklov Shchuchin

Motoblock PROFI 1900 PRO (18 hp, 7×12 wheels, low gear) + 5 Gifts!

Article number : 4687 Weight, kg : 175 Power, hp. : 18 Differential : yes Power, kW : 13.2 Engine volume, cc : 420 Tank volume, l : 6.5 Cooling : air Wheel size : 7x12 Transmission : gear reducer with bevel gear Gears : 3 forward, 1 reverse Overall dimensions, mm : 1900x1400x900 Working width, mm : 800 - 1100 Working depth, mm : up to 300 Engine model : Intek OHV AMS190F Lubrication system : with pre-mixing Fuel consumption, g/kWh : 1.3 Number of voters : 41 Rating : 3.61 Available in installments ? : N Availability of low gear : Yes Reverse (reverse) : yes Tact : four-stroke Total ratings : 153 Smart cards : 1 Country of origin : Germany Manufacturer (GmbH, Belgische Strasse 1, 15234 Frankfurt Oder, Germany

Read also: Motor cultivators Carver (Carver)

The walk-behind tractor is equipped with a low gear!

The Profi 1900 PRO walk-behind tractor is a great find for any vegetable garden or plot of land. This is an assistant for a real farmer! This model is unique in that the walk-behind tractor has a low gear. Now even the hardest jobs will become a pleasant walk.

The PRO SERIES line was created by Profi for proper use on land plots. PRO SERIES is a special quality standard for agricultural machinery, and the Profi 1900 PRO walk-behind tractor is the pride of this unique series. In the classic configuration, the walk-behind tractor is equipped with enhanced engine protection and a multifunctional glove compartment. If you need to expand the range of application of the unit, take advantage of the extensive equipment included with this model.

The walk-behind tractor has a powerful engine, an analogue of the famous Japanese brand AMS 190F, and a gearbox that ensures accurate gear ratio changes. When plowing in a low gear (4 gears in total - 1 backward and 3 forward), you can move at low speed, which makes working on the ground more convenient. And with a power take-off shaft, you can easily use a wide range of attachments for walk-behind tractors. A walk-behind trailer is perfect for the unit for use in agricultural work.

Features of the Pro 1900 PRO model:

The gasoline engine ensures precise fuel distribution.
Availability of 4 gears.
Smooth and precise change of gear ratio.
Effective anti-vibration protection.
Quick start with decompression valve.
The speed of changing direction of movement, which is provided by active differentials.
Dry clutch with manual control, which does not require serious maintenance.
All-terrain capability thanks to pneumatic wheels and textured tread.
Patented HotStart system for easy starting.
Fastening for any kind of hinged.
The handle is adjusted to the operator's height.
Glove compartment for necessary things and tools.
Footrest for easy storage.
Stability, the model belongs to heavy walk-behind tractors.
Two headlights - you can work even in the dark.

TRAILER or POTATO PLANTER or POTATO DIGGER
Universal cutter
Plow (post 16mm, working width 22 cm, 3 holes on the post)
Hitch FM-701/901/902/905 (for 16 mm rack, screw adjustment in 2 planes)
Double-row hiller STV (stand 16 mm, adjustable width)

Description

The Profi 1030 walk-behind tractor has proven itself excellent in the agricultural and agricultural industries. The pro is in demand among gardeners, summer residents and farmers.

The Profi 1030 walk-behind tractor is capable of automating a wide range of land work: plowing, milling, planting crops, etc. It is equipped with a gasoline engine with a power of 8.5 horsepower and air cooling. Profi runs on AI-92 or AI-95 fuel.

Gasoline consumption in medium load mode is 2 liters per hour.

Start of walk-behind tractor

Immediately before starting the walk-behind tractor, it is necessary to check and adjust all connections, especially the clutch, gas and reverse, as well as the wheel fastening. Properly adjusted joints should move smoothly, smoothly, but without much effort at the beginning of the movement.

To start the gas engine using a recoil starter, open the gas valve, set the fire extinguishing lever to throttle mode, turn off the ignition and make 3-5 strokes using the starter. Then turn the ignition on and pull the starter again. Once the engine has come to life, you need to move the throttle lever to the RUN position. On gasoline engines with an electric starter, everything is much simpler: just turn on the ignition and you can start it immediately, since when you press the “Start” button, the electric starter itself begins to inject gasoline into the carburetor.

A little more complicated. Diesel walk-behind tractor. Initially, the launch system. Air and it must be pumped by vigorously turning the starter to start the engine.

READ How to Convert a Rotary Mower to a Motoblock

If the engine is equipped with a manual starter, it can be primed in another way: open the fuel supply valve and open all connections in sequence until diesel fuel comes out of them. It's a little blurry. We close the connection and open the next one, repeating everything from the beginning, and therefore step by step we get to the nozzle.

When starting a diesel engine manually, it is necessary to open all supply valves, set the gas to the middle position and squeeze out the decompressor. Hold it with your finger and inflate it several times, then gently pull to return it to its original position. Then press the decompressor again and immediately pull the starter to start the engine.

When purchasing, be sure to ask the seller to tell and show how to properly start the future walk-behind tractor. Thus, you will not only become familiar with all the nuances of starting it, but you will also be able to make sure that your walk-behind tractor is working.

Source

Motoblocks. This is quite a serious and expensive gardening equipment. If you want it to fully perform its functions, work for a long time and reliably, you need to take careful care of it and follow all the recommendations for use prescribed by the manufacturer.

When buying a car, it is important to know how to start a walk-behind tractor. There is a certain sequence of actions, which consists of preparing the equipment for start-up and its immediate start-up.

Device

The Profi 1030 walk-behind tractor is equipped with a headlight, which allows owners to carry out work even in the dark.
Protective wings are installed above the cutters, which prevent dirt and dust from flying away from under the cutters into the operator.
Thanks to the gear reducer with differential, increased maneuverability and the ability to process hard-to-reach places are achieved.
The power take-off shaft of the Profi 1030 walk-behind tractor allows you to control the rotation speed of the attachment.

Motoblocks Profi 1900. Review, characteristics, owner reviews

Content

Profi 1900 is an example of heavy-duty motor vehicles, the main task of which is to perform various operations on a plot of land, namely plowing, cultivation, harvesting, hilling, watering, and garbage collection. This set of functions for the Profi walk-behind tractor provides a wide range of additional attachments.

Read also: Tractor T-25: technical characteristics, description, device and reviews

The manufacturer produces several modifications in this line of walk-behind tractors, which differ slightly in power, weight and technical capabilities. All 1900 series walk-behind tractors can be classified as household devices; their technical potential allows cultivating land up to 25 acres.

User manual

Before each trip, owners need to visually inspect the condition of the Profi 1030 walk-behind tractor for oil leaks, the condition of the wiring and the presence of deformations.

The operating instructions contain information regarding the assembly sequence of the Profi 1030, the purpose of the levers and the rules for the safe operation of the device.

Service

The operating instructions also contain information about servicing the Pro walk-behind tractor.

At the end of each trip, it is necessary to remove any remaining dirt and dust from the car to prevent the appearance of pockets of corrosion.
The engine oil in the Profi 1030 walk-behind tractor should be replaced after 25 hours of operation, and the transmission oil after 50 hours.
Gearbox shift levers should be lubricated with waterproof lubricant (Litol-24 or Solidol can be used) once a month.

Video: How to Start a Diesel Motoblock

The engine of the Neva walk-behind tractor can only be turned off at idle, otherwise the risk of failure of a conventional magnet will increase.

How to start the Ural walk-behind tractor?

Before starting the Ural walk-behind tractor, you must make sure that its air filter is completely clean. It is also necessary to inspect the spark plug. agricultural machinery of this brand. This is a common leak of engine oil from a separate tank into the engine cylinder.

Replacing the seals will solve this problem in a short time, but they last about 20 hours.

To start the Ural walk-behind tractor you need:

Move the throttle control lever to the “closed” position:
Set the accelerator to minimum speed;
Turn on the fuel supply valve;
Slowly pull the starter cable until resistance is felt;
Pull the starter rope sharply towards you. As a result, the engine should start;
Open the throttle and let the engine warm up.

After this, you can start operating the walk-behind tractor on the website.

How to start the Patriot walk-behind tractor?

To extend the life of Patriot walk-behind tractors, it is necessary to fill them only with pure 92-octane gasoline. It is not recommended to use 95 fuel, since its quality at many gas stations is much lower than that of AI-92 gasoline. Synthetic motor oil for 4-stroke internal combustion engines is poured into the crankcase.

READ Neva Motoblock And Disc Plowshare Its Work

In addition, Patriot walk-behind tractors are equipped with a reservoir for filling oil directly into the air filter of agricultural units. There are marks on the tank where you can add oil. The manufacturer does not recommend pouring oil through the “bath” provided in the tank, since the heated liquid will gradually begin to flow into the engine carburetor.

Then you can proceed directly to starting the engine. This will require:

Set the cold start lever to the left position;
Turn the fuel supply valve to the “On” position;
Set the ignition button to the “Start” position;
Slowly pull the starter cord until resistance is felt;
Pull the starter rope sharply towards you. As a result, the engine should start;
Let the engine warm up;
Move the throttle control to the mid-angle position;
Install the cold start lever on the right.

It is important to remember that after the first activation of the Patriot walk-behind tractor, it must be started, which is done under load. There is no need to allow the engine to generate the first tank at idle, since its device has a piston with rather thin walls. When idling for a long time, the part heats up and fails.

Source

The work of any engine begins with its start. But the trouble is that, having made a purchase, the new owners have no idea how to properly start the walk-behind tractor. The paradox is that manufacturers apply step-by-step instructions to each copy of their product, detailing the sequence of maintenance and care for their offspring, but the buyer ignores these recommendations with a persistence worthy of better use, believing that he already knows everything.

Owner reviews

Here's what owners say about Pro walk-behind tractors on agricultural forums:

Vladimir:

“In general, I am satisfied with the walk-behind tractor, I purchased the machine in 2020, and since then it has paid for itself more than once. Reliable and functional walk-behind tractor. It carries out plowing and milling without problems, and calmly pulls a cart with a load up to half a ton. I don’t work on it much, so 8.5 horses is enough for me. I worked on it for a maximum of 8 hours a day, it overheats and needs stops to cool down.”

Motoblock Pro 1030 8.5 hp

Profi 1030 is a multi-purpose walk-behind tractor designed for professional tasks. The equipment has an optimal price-quality ratio, which can be seen by reading the reviews of real owners of Profi 1030. The walk-behind tractor has many more advantages than disadvantages, which, however, is confirmed by the reputation of the Profi brand, recognized throughout the world. The quality of this company's products is beyond doubt, and Profi 1030 is a prime example of this. Let's take a closer look at the features and advantages of this walk-behind tractor, and also pay attention to its advanced qualities compared to more expensive competitors.

General information and design features

Profi 1030 has proven itself well in the agricultural sector. The machine is in demand among gardeners, summer residents, and farmers and is designed for a wide range of tasks. In the basic configuration, the capabilities of the equipment are strictly limited, but you can install any attachments, fortunately this possibility is provided by the flexible design of the walk-behind tractor. So, depending on a particular set of options, the Pro 1030 model is capable of cultivating, hilling, harrowing, plowing and mowing grass. In addition, the equipment will satisfy the needs of municipal services and greenhouses. The machine is equipped with sharp cutting cutters covered with a special shield. This shield acts as a kind of protection for the walk-behind tractor and the operator from flying grass, dust, stones, lumps of soil and dirt.

Let's highlight the main advantages of Profi 1030:

Electronic speed limiting system in case of engine overheating
Powerful power plant. Its design includes five bypass channels, ensuring precise layer-by-layer distribution of the charge of the combustible mixture
Decompression valve necessary for quick engine starting in any weather
High fuel efficiency - achieved thanks to a more capacious fuel tank, as well as innovative technologies. The result is a longer operating interval
Balanced indicators of the weight of the walk-behind tractor, as well as the weight of the handle drive. The handle itself can be adjusted “to suit you”, and thereby achieve the optimal position based on the operator’s height. The handle is adjustable in height and horizontally
Built-in anti-vibration noise reduction system, which eliminates extraneous sounds throughout the entire period of use of the walk-behind tractor
Sophisticated gas exhaust system

Starting a walk-behind tractor correctly after winter

Before starting the walk-behind tractor after a long winter period of inactivity, it is necessary to carefully prepare it. The first step is to remove the equipment from the garage and inspect it. There should be no pockets of corrosion on the metal surfaces of the agricultural implement, the appearance of which may be caused by high humidity. In case of corrosion, it will need to be removed, the problem areas treated with a special rust converter and areas of paint.

After this you will need:

Drain the old fuel from the tank and remove the old lubrication gear. The latter must be thoroughly washed and dried. Next you will need to add fresh fuel and new transmission oil;
Wash the fuel pipes, make sure they are not leaking and there are no cracks in the walls;
Remove all filter elements provided by the design, wash them thoroughly with clean gasoline, dry and reinstall. Damaged filters must be replaced;
Remove and disassemble the carburetor, blow it with compressed air or wash it with gasoline. After this, the completely dried parts of the fuel block must be reassembled and replaced;
Check the drive belts. Cracks may appear on their surface due to high humidity. In this case, the elements must be replaced immediately;
Disassemble and inspect the CIS power supply. If burrs or traces of rust appear on the walls of the assembly, they will need to be removed;
Unscrew and check the spark plug. There should be no traces of scale or deposits on it. Otherwise, the candle must be cleaned and dried. After this, it is necessary to ventilate the engine by sharply pulling the starter cable several times;
Check the ignition system clearance and install it again if it was broken;
Inspect the controls and ensure that the gas cables and brakes are as tight as required for operation;
Remove, charge and reinstall the battery, if provided for by the design of the walk-behind tractor. At the same stage, it is necessary to check the wiring terminals and contacts. There should be no traces of oxidation on them;
Check the tire pressure and inflate them according to the walk-behind tractor instructions;
Inspect the chassis of the walk-behind tractor and tighten the mounting bolts;
Check the connection mechanism for attachments and trailers.

READ Dismantling Motoblock Neva MB 2

Only after all the above steps can you start the walk-behind tractor.

To start an agricultural unit with a gasoline engine, you must:

Open the gas valve fully. In this case, the fuel suction lever should be in the “Start” position and the clutch lever. In the "Disabled" position;
Perform manual bleeding of the starter by sharply pulling the cable several times;
Turn the ignition lever to the "On" position and pull the starter rope a few more times;
As soon as the engine of the used walk-behind tractor starts, you will need to quickly move the fuel suction lever to the “Work” position.

If the gasoline walk-behind tractor has an electric starter, the operator just needs to turn on the ignition and press the engine start button.

Getting a diesel walk-behind tractor is a little more difficult.

This will require:

We unscrew the valve intended for supplying fuel, gradually unscrewing each standard connection from it;
As soon as the fuel reaches the nozzle, you need to open all the valves in the structure and set the gas lever to the middle position;
Press and hold the decompressor until fuel is pumped into the cylinder;
Release the decompressor and begin to gently pull it out until it is in its original position;
Press the decompressor again and at the same time quickly pull the starter cable towards you.

Basic equipment and attachments

In fact, there is nothing in the standard equipment of the walk-behind tractor. The most important, hanging options, are purchased separately, and their set depends on the preferences of the buyer. So, let's look at the list of basic equipment, and then highlight the most common types of attachments for this model.

The basic package includes:

Rubber tires with deep tread. Dimensions – 6.0-12
Cultivator (standard set with cutters)
Hitch
Tools
User guide
Manufacturer's warranty

Terms of use

The manufacturer recommends running in the walk-behind tractor before subjecting it to maximum load. During the break-in period, a gentle load is allowed, namely no more than 50% of the limit value specified in the user manual. The purpose of break-in is to allow internal components to break in and adapt to local road and climatic conditions. Thanks to this, the durability and reliability of the walk-behind tractor will be ensured for many years - naturally, subject to timely maintenance. So, let's look at the stages of running in:

The purchased walk-behind tractor will most likely be disassembled. We assemble it, tighten all the bolts and nuts tightly, check all the fasteners, then start the engine
It is important that the engine idle for 50-60 minutes. It is necessary to provide the motor with a gentle load, which can be increased gradually, namely by increasing the speed
Check the operation of the gearbox. Here you need to pay attention to the clarity of the gear shift mechanism. Any noise and vibration are excluded, if only because the walk-behind tractor is completely new
During running-in, you can perform cultivation, hilling, planting and planting vegetable crops, transporting goods, pumping water and other types of agricultural tasks. At the same time, you need to remember about the gentle load. For example, when transporting goods, their maximum weight should not exceed 250-300 kg out of the permissible 500 kg.
The run-in can be considered completed after 8-10 hours. We drive the car back into the garage and carefully inspect it for damage. Fuel and other consumables may need to be replaced. The next day the machine is available for full operation with maximum load.

How to launch walk-behind tractors of popular brands?

Depending on the design features and manufacturer, agricultural units can be launched in one way or another. It is important to remember this because an incorrect algorithm can gradually lead to serious damage to the equipment.

Motoblock Neva. How do you think we should start?

Before starting the engine directly, it is necessary to check the oil level in the crankcase. To do this, unscrew the filler cap located in front of the power source. There is a threaded probe at the end of the plug. If the oil slick reaches this thread, it means there is enough oil to run the engine.

READ Motoblock Kutaisi Engine Replacement

To properly start the Neva walk-behind tractor, you must:

Turn the ignition key to the “on” position;
Open the fuel supply valve;
Close the standard butterfly valve;
Set the accelerator lever to approximately 3/4 of the maximum permissible speed;
Pull the starter rope towards you until resistance appears;
Pull the starter rope sharply towards you. As a result, the engine should start and stop immediately;
Open the throttle slowly;
Pull the starter rope a few more times until the engine starts and idles.

The engine of the Neva walk-behind tractor can only be turned off at idle, otherwise the risk of failure of a conventional magnet will increase.

How to start the Ural walk-behind tractor?

Replacing the seals will solve this problem in a short time, but they last about 20 hours.

To start the Ural walk-behind tractor you need:

Move the throttle control lever to the “closed” position:
Set the accelerator to minimum speed;
Turn on the fuel supply valve;
Slowly pull the starter cable until resistance is felt;
Pull the starter rope sharply towards you. As a result, the engine should start;
Open the throttle and let the engine warm up.

After this, you can start operating the walk-behind tractor on the website.

How to start the Patriot walk-behind tractor?

Then you can proceed directly to starting the engine. This will require:

Set the cold start lever to the left position;
Turn the fuel supply valve to the “On” position;
Set the ignition button to the “Start” position;
Slowly pull the starter cord until resistance is felt;
Pull the starter rope sharply towards you. As a result, the engine should start;
Let the engine warm up;
Move the throttle control to the mid-angle position;
Install the cold start lever on the right.

READ Motoblock Beam Carburetor Adjustment

Specifications

Country of origin: Germany. The engine is a gasoline single-cylinder, four-stroke type, air-cooled. Power – 8.5 horsepower. The gearbox is a three-speed manual, with two forward gears and two reverse gears. The starter is of a mechanical type.

Other parameters: processing width – 900 mm, processing depth – up to 300 mm. The list of integral parts of the design includes a gear reducer and a disc clutch. The diameter of each wheel is 6 inches.

Manufacturer's warranty is two years from the date of purchase.