Chainsaws of the Husqvarna brand are among the three most common models in Europe and the CIS countries. As for the specific Husqvarna 142 model, the characteristics of which will be described in the article, it is listed in the category of household devices, but its features are suitable for semi-professional level specialists. The product has a design that is developed on the basis of a classical layout using mechanical engineering and assembly technologies.
When the model was being developed, technologists focused on increasing comfort during operation, safety of performing various types of work, as well as extending the life of the most important components and parts.
Specifications
Husqvarna 142, whose characteristics are quite good, belongs to the class of household tools designed for sawing wooden materials. A distinctive feature is the affordable price, combined with impressive characteristics.
The equipment operates using a two-stroke air-cooled engine. The power here is 2.58 liters. s., which is equivalent to 1.9 kW. The working volume is 40 cm3. A rather important characteristic is the ignition system. This is a capacitor device. The distance between the electrodes is 0.5 mm.
Among the main characteristics of the Husqvarna 142, the fuel compartment capacity should be highlighted, which is equal to 0.37 liters. The recommended gasoline for use is high-octane unleaded. The ratio of gasoline to oil when preparing the mixture for refueling is 50 to 1. As for the chain lubrication system, this is a 0.19 liter capacity. The cutting set is a bar with a length of 15 inches, which is 38 cm. The chain pitch is 0.325 inches.
additional characteristics
You may also be interested in the ergonomic characteristics of the Husqvarna 142. Thus, the level of noise emitted during operation varies from 98 to 108 dB. The final value will depend on the measurement technique. Without a chain and bar, the chainsaw will have a dry weight of around 4.8 kg. If we analyze the characteristics, we can note three main features. Among them is sufficient power for a household device. If we analyze professional units from the same manufacturer, then their average power is approximately 20% more.
Chainsaws Husqvarna - model range of the Swedish company
The Husqvarna company is known for the huge range of branded chainsaws on the market. We bring to your attention a review of Husqvarna chainsaws with a detailed description of the most popular models.
Husqvarna 61
This Husqvarna chainsaw cuts through old thick branches efficiently and quickly and helps you prepare large quantities of firewood. Technical parameters of this popular model include:
- Power – 3.9 l. s./2900 Watt;
- Standard tire size – 45 cm;
- Reservoir for replenishing fuel – 750 ml;
- Oil tank – 400 ml;
- Ready-to-use weight: 6.6 kg.
This Husqvarna chainsaw is small in size, so even a small bag is suitable for transportation.
Husqvarna 136
This semi-professional Husqvarna chainsaw is primarily used for maintaining large garden areas. Technical characteristics of this Husqvarna chainsaw include:
- Power – 2.2 l. s./1600 Watt;
- Tire length per set – 45 cm;
- Fuel refill tank – 410 ml;
- Oil tank – 175 ml;
- Operating weight – 4 kg.
The design of this Husqvarna chainsaw is based on a forged piston group, which significantly increases wear resistance and increases the endurance of the model.
Husqvarna 235
This professional Husqvarna chainsaw has received the highest demand due to its well-thought-out design and balance. Technical parameters of this Husqvarna model include:
- Power – 1.7 l. s./1300 Watt;
- Factory tire size – 30 cm;
- Reservoir for replenishing fuel – 300 ml;
- Reservoir for lubricant – 200 ml;
- Operating weight – 3.5 kg.
The modest size of the chainsaw allows it to be easily placed in a carrying case.
Chainsaws Husqvarna 257 XP and Husqvarna 455 Rancher
These Husqvarna chainsaws do an excellent job of sawing small logs and cutting down old branches. The operating parameters of chainsaws are described in the table below.
| Chainsaw model | Husqvarna 257 XP | Husqvarna 455 Rancher |
| Power | 3.7 l. s./2700 Watt | 3.5 l. s./2600 Watt |
| OEM tire size | 45 cm | 45 cm |
| Reservoir for replenishing the fuel mixture | 600 ml | 440 ml |
| Lubricant reservoir | 350 ml | 320 ml |
| Ready-to-use mass | 5.5 kg | 6.1 kg |
The power of these models is quite enough to make an ice auger from a chainsaw or other useful household units with your own hands.
Chainsaws Husqvarna 262 XP and Husqvarna 576 XP
These Husqvarna chainsaws are originally designed for use in the most difficult conditions and can easily cope with sawing fairly thick beams and long-term felling of large trees. The design parameters of these units are described in the table below.
Read also: How to make gates from corrugated sheets with your own hands
| Chainsaw model | Husqvarna 262 XP | Husqvarna 576 XP |
| Power | 4.7 l. s./3400 Watt | 5.6 l. s./4200 watts |
| OEM tire size | 50 cm | 50 cm |
| Fuel refill tank | 600 ml | 700 ml |
| Oil tank | 300 ml | 400 ml |
| Ready-to-use mass | 5.8 kg | 7.2 kg |
Each of these Husqvarna chainsaws is equipped with a durable 2-stroke motor, chain brake and adjustable oil pump.
Chainsaws Husqvarna 268 and Husqvarna 562 XP
The main area of application for these chainsaws is intensive forest felling and construction. The model parameters are described in the table.
| Chainsaw model | Husqvarna 268 | Husqvarna 562 XP |
| Power | 4.4 l. s./3200 Watt | 4.7 l. s./3500 Watt |
| Factory tire size | 45 cm | 45 cm |
| Reservoir for filling fuel | 600 ml | 650 ml |
| Oil reservoir | 270 ml | 290 ml |
| Ready-to-use weight | 5.7 kg | 6.3 kg |
These Husqvarna chainsaws are equipped with a reliable chain brake and an adjustable oil pump.
Chainsaws Husqvarna 272 XP and Husqvarna 372 XP
These Husqvarna chainsaws are used for felling forest trees and cutting thick logs for construction. The model parameters are described in detail in the table.
| Chainsaw model | Husqvarna 272 XP | Husqvarna 372XP |
| Power | 4.9 l. s./3600 W | 5.5 l. s./3900 Watt |
| OEM tire size | 45 cm | 50 cm |
| Reservoir for fuel mixture | 750 ml | 770 ml |
| Oil tank | 500 ml | 400 ml |
| Operating weight | 6.7 kg | 7 kg |
The technical characteristics of these models allow you to use branded attachments for Husqvarna chainsaws to work with them.
Chainsaws Husqvarna 339 XP and Husqvarna 353
Both of these models are practically the same in design. The main difference is that the Husqvarna 339XP model has more modest technical parameters. The performance of chainsaws is described in detail in the table.
| Chainsaw model | Husqvarna 339 XP | Husqvarna 353 |
| Power | 2.45 l. s./1800 Watt | 3.26 l. s./2400 Watt |
| OEM tire size | 35 cm | 40 cm |
| Reservoir for filling fuel | 360 ml | 500 ml |
| Oil tank | 200 ml | 300 ml |
| Operating weight | 5 kg | 5.6 kg |
Both models are great for sawing logs and cutting down small to medium sized branches.
Husqvarna 345E
This model was included in our review due to the presence of a number of useful proprietary options and high endurance. Among the parameters of the Husqvarna 345 chainsaw, the following should be highlighted:
- Power – 2.7 l. s./2000 Watt;
- The size of the tire included in the kit is 35 cm;
- Reservoir for filling fuel – 500 ml;
- Oil reservoir – 270 ml;
- Ready-to-use weight: 5.1 kg.
This Husqvarna chainsaw is widely used for removing thick branches and cutting down small garden trees.
Chainsaws Husqvarna 440E II and Husqvarna 445E II
Both Husqvarna chainsaws have almost the same design and performance indicators. The model parameters are described in detail in the table below.
| Chainsaw model | Husqvarna 440E II | Husqvarna 445E II |
| Power | 2.2 l. s./1600 Watt | 2.2 l. s./1600 Watt |
| OEM tire size | 40 cm | 40 cm |
| Reservoir for filling fuel | 370 ml | 370 ml |
| Oil tank | 250 ml | 250 ml |
| Operating weight | 4.8 kg | 5 kg |
The Husqvarna 440 and Husqvarna 445 models performed well when cutting down medium and small trees, as well as processing logs for heating.
Chainsaws Husqvarna 357 XP and Husqvarna 365H
These Husqvarna chainsaws have found application in utility companies. Due to their efficiency and long service life, they are also in demand among owners of large garden plots. The parameters of the Husqvarna 357 and Husqvarna 365H models are described in detail in the table below.
| Chainsaw model | Husqvarna 357 | Husqvarna 365H |
| Power | 4.3 l. s./3200 Watt | 4.6 l. s./3900 Watt |
| OEM tire size | 45 cm | 45 cm |
| Reservoir for replenishing the fuel mixture | 680 ml | 770 ml |
| Oil reservoir | 380 ml | 420 ml |
| Operating weight | 6 kg | 6.5 kg |
These Husqvarna chainsaws have enviable reliability and good build quality.
Chainsaws Husqvarna 359 and Husqvarna 395XP
This Husqvarna chainsaw is designed for maintaining large garden areas and intensive deforestation. The technical parameters of the models are described in the table.
| Chainsaw model | Husqvarna 359 | Husqvarna 395XP |
| Power | 3.9 l. s./2900 Watt | 6.66 l. s./5200 Watt |
| Factory tire size | 40 cm | 60 cm |
| Reservoir for filling fuel | 680 ml | 900 ml |
| Lubricant reservoir | 380 ml | 500 ml |
| Operating weight | 5.8 kg | 8.1 kg |
These models are equipped with reliable engines, significantly expanded carburetors and improved ignition systems.
Chainsaws Husqvarna 545 and Husqvarna 555
These chainsaws cope well and quickly with sawing fairly thick beams and quickly cutting down small and medium-sized trees. The characteristics of the models are described in the table below.
| Chainsaw model | Husqvarna 545 | Husqvarna 555 |
| Power | 3.4 l. s./2500 Watt | 4.3 l. s./3200 Watt |
| Recommended tire size | 45 cm | 50 cm |
| Reservoir for filling fuel | 520 ml | 650 ml |
| Lubricant reservoir | 270 ml | 330 ml |
| Ready-to-use mass | 5.4 kg | 6 eg |
The design of this tool includes a high-quality vibration damping system and an instantaneous inertial brake.
Is gasoline quality important?
Another feature is the cutting set, which can be easily replaced. In addition, you may also be interested in the fact that the supplier company emphasizes that the device is not too demanding on the quality of gasoline. The minimum permissible octane number is not specified. From this we can conclude that the characteristics of the Husqvarna 142 chainsaw; Suitable for craftsmen who plan to use the tool in the countryside, as well as specialists who perform tasks on a semi-professional scale.
Video: Husqvarna 142 Chainsaw Malfunctions
The chainsaw starts and stops. Repair methods
If the Husqvarna 142 starts and stops immediately, the main reason for this is wear on the rings, which causes loss of compression. If the engine starts and stops during a cold start, check the muffler as well as the contact between the high voltage wire and the spark plugs.
To fix the problem, you will need to disassemble the saw and inspect the piston rings. If necessary, they must be replaced. It would be a good idea to clean the cylinder walls of residual fuel.
If the rings work, check the contact between the spark plugs and the chainsaw wire. You also need to clean to remove the muffler and inspect its walls. Due to prolonged use of the tool, a thick layer of soot accumulates on the walls of the muffler. In this case, you will need to blow out the element with compressed air from the cylinder.
READ Is It Possible to Saw Dead Wood
After completing all the above procedures, you need to assemble the tool and run it. Before using the saw, allow a few minutes to warm up the engine. You can then continue to use the tool as normal.
Chainsaw Husqvarna 142. This is a budget modification that unites the famous Swedish company Husqvarna, which firmly occupies a leading position in the world market. The history of the company began in 1689, chainsaws began to be produced in 1970, at the same time the company began producing gardening tools and equipment. Until 1970, the main specialization of the Husqvarna brand was weapons for the army.
Controls Overview
In this matter, the chainsaw described is the classic minimum. The controls are represented by a switch that can be moved to one of two positions. The choke position lever should also be highlighted. It can be installed in one of three positions. Upon inspection of the housing, you will notice the throttle position control lever. It is combined and has a stopper. Only the suction requires explanation here. Between the open and closed positions of the damper there is a stable position that will correspond to the damper being half open. This applies to the carburetor choke. This position is necessary when turning off a cold engine after jerking with the starter, when the damper remains closed.
Consumer Reviews
A fairly important factor before purchasing any of these tools is consumer opinion. They emphasize that the fuel mixture is quite often prepared from AI-92 gasoline and two-stroke oil, using the traditional proportion of 50 to 1. If there is no oil on hand, in the indicated ratio it is necessary to add high-quality oil, which is diluted with gasoline in a ratio of 33 to 1. Similar operation permitted only for a short time.
Consumers emphasize that when using Husqvarna 142 for an hour, it can be noted that it is ideal as a household tool. There is almost no vibration in the hands, and the noise level is quite bearable. A fairly important factor is excellent cutting ability. If you take the trunks of dry birch and fresh pine with a diameter of 26 cm, you can saw them repeatedly in 7 seconds each. If there is such a need for dry oak, it can be sawed somewhat more slowly. A 24 cm log will take approximately 14 seconds. The cutting speed, as the craftsmen emphasize, is somewhat lower compared to professional chainsaws, which are of a different order of cost.
Additional opinions
The characteristics of the Husqvarna 142 saw allow you to work with it at full power, without fear of overload at high speeds. The brake works perfectly and the chain stops instantly. If we analyze the reviews of the owners of such a chainsaw, who use it from time to time and to perform household tasks, we can highlight the following opinions: the piston group is reliable, the saw is fuel-efficient and quite convenient, the tire is very strong. Failure, however, can happen, but such troubles are rare and are caused only by the time for replacing consumables. Such a problem with Husqvarna 142 can also arise due to errors made at the time of preparing the fuel mixture.
Carburetor adjustment
Setting up a chainsaw is very simple. To do this, you will need to follow several steps. To begin with, the engine is adjusted to run smoothly at low speeds. Then the carburetor must be adjusted to supply the fuel mixture at maximum speed. In addition, you will need to adjust the carburetor to idle and check the device in all modes. Such manipulations are carried out after the engine has warmed up a little.
You will need to use 3 screws for this. The one designated by the letter T is responsible for setting in idle mode. With screw H you can adjust the operation at maximum speed, but you can adjust the mixture at low speed with screw L. The fuel mixture can be leaned by tightening the 2nd and 3rd screws, the speed will increase.
If the carburetor is not adjusted and starting is not possible, adjustment begins with screws L and H. They must be set to the standard setting position. After this, the engine starts and is left until it warms up. At the next stage, you can begin setting up the low speed mode. In this case, optimal engine operation can be achieved using screw L and idle screw T. To do this, the 1st screw is tightened to maximum engine speed, and then released to a quarter. The second screw will bring the idle speed back to normal. Once the operation has been adjusted at the bottom, you can adjust the traction and adjust the maximum speed. To do this, screw H is slowly tightened, and the speed can be checked with an electronic tachometer.
Adjust the carburetor yourself for the Husqvarna 142 chainsaw
Installing a Husqvarna 142 chainsaw carburetor eliminates a number of problems.
Their list includes:
- Slow engine acceleration;
- Inability to achieve maximum torque;
- Frequent engine shutdown;
- The appearance of loud knocking noises when the tool is operating;
- Increased amount of fuel consumed.
READ How to Adjust a Stihl 180 Chainsaw
Failure to adjust the saw's carburetor promptly will result in more serious damage that will damage the engine and ignition system.
As stated in the instruction manual, installation of the Husqvarna 142 carburetor should be done in the following order:
- First you need to start the saw and let it warm up the engine;
- Then you need to turn screw L to achieve maximum engine idle speed;
- After reaching maximum speed, screw L must be turned 1/4 turn in the opposite direction. If during this time the saw chain begins to rotate, screw T should be turned counterclockwise until the chain stops completely:
- Propeller H is adjusted at 10 second intervals at maximum engine speed. In this case, the screw should gradually rotate 1/4 turn clockwise. If during this time the saw motor does not reach maximum speed, you need to turn the screw another 1/4 turn. Too low a speed will be accompanied by a loud squeaking sound from the tool, and too high a speed will be accompanied by an increase in the amount of exhaust gases;
- To adjust screw T, turn it clockwise until the chain begins to rotate. Immediately after this, the screw must be turned in the opposite direction until the chain stops completely.
After completing all these steps, the Husqvarna 142 owner will be able to stabilize the tool, reduce fuel consumption and protect important parts of the saw from overload.
Characteristics of the chain and reviews about it
If you know the characteristics of the Husqvarna 142 chain, then first of all you should pay attention to the pitch, which is 0.325 inches. The chain thickness is 1.3 mm. Lubrication eliminates chain overheating and accelerated wear. Lubrication is carried out automatically, which also applies to the tire. At idle speed, no oil is supplied, which contributes to economical consumption.
If you notice that the chain is not lubricated at operating speeds, the reason lies in the oil line, which may be clogged with sawdust. The defect can be eliminated by cleaning this unit. The technical characteristics of the Husqvarna 142 chainsaw are outstanding. But this device also has its drawbacks. Among others, consumers highlight the absence of a toothed stop, which is necessary for securing the unit when cutting round timber. In addition, there is no visual control over the fuel level, which also applies to chain oil.
Buyers also consider the not very convenient chain tightening scheme to be a disadvantage. You should not use an expensive carbide chain for sawing oak, as you may later encounter problems with sharpening it.
Husqvarna 142 chainsaw instruction manual
Operating instructions must be included with the gas tool. It contains all the necessary information about the Husqvarna 142 chainsaw that the owner of the equipment should know:
- The device is a Husqvarna 142 chainsaw.
- Saw assembly
- Included.
- Precautionary measures.
- Characteristics of the Husqvarna 142 chainsaw.
- Ways of working.
- Preparing the chainsaw for work.
- Breakthrough period.
- Technical details.
- Service.
- Malfunctions of the Husqvarna 142 chainsaw.
Included:
- Instructions;
- Pollen chain;
- Guide;
- Profiled sheeting;
- Universal key;
- Container with chain oil;
- Chainsaw.
Preparatory stages
Before dust formation begins, the equipment owner must properly prepare the fuel mixture: 50/1. Recommended ratio. This means that for 1 liter of uninsulated gasoline AI-90-92, 0.1 liter is required. Oils for two-stroke engines of the Husqvarna brand.
How to properly prepare a gas tool for work:
- Assembling the chainsaw, guide and chain installation, chain tension
- Fill the chainsaw with fuel and oil in appropriate containers.
- The chainsaw will start according to the instructions in the manual.
- The brake system has been checked, the saw is idling, oil is supplied to the chain, and the carburetor of the Husqvarna 142 chainsaw is adjusted if necessary.
READ How to Properly Cut Firewood with a Chainsaw
Works in
The startup period lasts about 10 hours. At this time, the tool operates at half power.
Husqvarna running chainsaw
Chainsaw device
The characteristics and design of Husqvarna 142 should be known to you if you are planning to purchase such equipment. By design, such units belong to classical mechanisms. The tool is powered by an internal combustion engine. The design of the chainsaw is quite simple, which indicates reliability, ensuring trouble-free operation even in the most difficult conditions.
In addition to the listed components, the chainsaw has an air purification system that is supplied to the carburetor. It is also worth highlighting:
- chain tension mechanism;
- starter;
- saw chain;
- ignition;
- muffler.
The engine is a single-cylinder two-stroke carburetor engine. The engine has high speeds, which imposes corresponding requirements on the oil used in the fuel mixture. The chainsaw also has a centrifugal clutch, which is activated depending on the engine speed.
The characteristics and review of Husqvarna 142 will allow you to become more familiar with this device. For example, you especially need to highlight the ignition system. She used to be a contact person, but today she is a thing of the past. The described device has a contactless electronic ignition, which relieves the operator of the burdensome work of adjusting the gap in the contacts. You won't have to clean them often.
Possible faults
If the saw won't start, the first thing to check is the spark, which is producing the spark that ignites the fuel in the cylinder. Start by removing the high voltage wire that the spark plug is connected to. Then remove the spark plug from the cylinder cover and check its condition. When used correctly, the candle should be dry and shallow on fine ceramics:
- If the spark plug is wet, problems with the carburetor occur. It is necessary to adjust and set the fuel level in it;
- The carbon on the spark plug walls is dark or black, indicating a problem with the piston group.
If you have not found an obvious cause of the malfunction here, the spark plug is dry, the light sediment continues to come from the opposite side. Since this is the end point of ignition of the working mixture. Now check if the spark plug ignites. This is the ignition system unit.
If the saw does not start, the first thing you need to check is the spark plug, which gives a spark, which ignites the fuel in the cylinder. Start by removing the high voltage wire that the spark plug is connected to. Then unscrew the spark plug itself from the cylinder cover and inspect its condition. When working properly, the candle should be dry and have small deposits on the ceramic of a light color:
- If the spark plug is wet, it means there are problems with the carburetor. It is necessary to adjust and set the fuel level in it;
- Soot on the walls of the spark plug is dark or black in color, indicating a malfunction in the piston group.
If you have not found any visible causes of the malfunction here, the spark plug is dry, the carbon deposits are light, continue to work backwards. Since this is the final point of ignition of the working mixture. Now check if the spark is getting to the spark plug. This is the ignition system unit.
Checking whether there is a spark will not be any particular problem; to do this, just take the high-voltage cable to which the spark plug is connected, bring it to the cylinder block, leaving a small gap between them, so that you can notice the spark slipping between them. Then we pull the starter cord and see if there is a spark and what color it is.
Now let's try to set the correct gap between the moving and fixed contacts. Ideally, it should be 0.2 mm. You can check it with a dipstick since it is not a deficiency.
This was a description of the malfunctions of the older generation of chainsaws. The new generation includes modern chainsaws Goodluck, Shtil and Husqvarna.
Modern systems
Modern systems are equipped with chips that regulate all of the above problems. A method for independently setting the ignition timing depending on engine speed and power transmitted to the cutting element. At the same time, fuel is saved significantly without sacrificing power. It also makes starting the saw much easier, regardless of weather conditions.
Additionally: Chainsaw Shtil 250 MS: characteristics and reviews
In addition to everything read, a video is offered here for a complete overview of the material presented.
