Gasoline snow blower Huter SGC 4000E

Snow blower Huter SGC 4100. Technical characteristics and operating rules

The Huter SGC 4100 snow blower is a self-propelled unit whose main function is to remove snow from open surfaces. Scope of application of the Huter Huter SGC 4100 snow blower: areas of private houses, small parks and squares, areas of public utilities, preschool institutions, schools, parking lots and other objects that need to be cleared of snow.

Thanks to the 5.5 hp engine, the Huter SGC 4100 snow blower can work for quite a long time in intensive mode. There is a self-propelled function, so the operator does not need to exert effort to control the device; the snow blower only needs to be directed and set the motion vector.

Distinctive features of the Huter SGC 4100 snow blower are:

• quick and easy launch;
• large wheels that allow you to drive over any terrain;
• gasoline four-stroke powerful air-cooled engine;
• simple design and control;
• manual start;
• ability to work for a long time even in extreme cold;
• large fuel tank capacity;
• a sufficient number of speeds to select the optimal snow removal mode.

Video of the Huter SGC 4100 snow blower in operation:

Based on the reviews left by owners of the Huter SGC 4100 snow thrower on thematic forums, we can draw conclusions about some of the difficulties that accompany the operation of this device, namely:

• To extend the service life of the Hooter snow blower, it is recommended not to leave it outdoors, especially in cold weather;
• Without proper care, the Huter snow blower can corrode, so after each cleaning it is imperative to remove any remaining snow from the body of the machine;
• on slippery ice areas where there is no snow or sand, especially on turns, the car can skid, despite the presence of rough winter tread on the wheels - the owner must control the movement of the device.

Video from the owner of the Huter SGC 4100 snow blower

Gasoline snow blower Huter SGC 4000E

The Huter SGC 4000E petrol snow blower is a development of German engineers, designed for quickly removing snow cover in relatively small areas (near a country house, in a parking lot, walking path, etc.). The device is self-propelled, that is, not only its working units, but also the support wheels are driven by a fairly powerful (6.5 hp) four-stroke air-cooled piston gasoline engine, an electric starter of 220 V and a manual starter. The engine is equipped with a 3-liter fuel tank for AI-92 gasoline, as well as a system that makes it easy to start it at fairly low ambient temperatures. The operator just needs to select one of 4 gears for forward movement, or one of 2 reverse gears, and then only give the snow blower the desired direction using the handle. Pneumatic tires, which are equipped with a pair of support wheels of the unit, have a special “winter” tread, which provides sufficient traction with a snowy surface even in icy conditions, practically does not allow slipping and allows the traction forces of the engine to be fully realized.

The working part of a gasoline snow blower is represented by a two-stage auger-fan system. Its ejection chute with reflector can be rotated and fixed in any direction within a range of 180 degrees, and the fan is capable of throwing crushed snow up to 15 meters from the cleaning site. The installation height of the receiving chute from the surface to be cleaned is adjusted manually. The throw distance of the removed snow can also be adjusted manually by adjusting the reflector. In one pass, the Huter SGC 4000E snow blower is capable of clearing snow cover up to 420 mm thick from a strip 560 mm wide.

Device and principle of operation

The Huter SGC 4000E snow blower is quite convenient and easy to operate. This is achieved due to the rational and balanced placement of its drive, operating systems and controls relative to the axis with wheels. The general design is a base frame mounted on two wheels, in the front part of which a receiving chute with an auger is mounted, and in the rear part there is a guide handle and controls. On top there is a gasoline drive and a throwing system (fan with reflector). All external surfaces, including the auger blades, have a durable and effective anti-corrosion coating. This is especially true given the environment they will be dealing with.

The power plant of the snow blower is a four-stroke piston single-cylinder gasoline engine of the Huter 168F OHV brand, air-cooled. The nominal 6.5 hp it develops is the power is sufficient to provide mechanical energy to the working units and movement of the entire structure. The engine is lubricated with oil from the crankcase forcibly. The engine is started either from a 220 V electric starter or manually using a cable starter. The engine power system is designed in such a way that it can be easily started even when cold in subzero temperatures. A fuel tank of 3 liters of gasoline allows you to work without refueling for quite a long period, depending on the load.

The working part of the snow blower begins with a catching chute made of durable sheet steel. It is made in the form of a bucket with the open part forward. At the bottom, on both sides, special support shoes are attached to its body. Each of them can be lowered or raised, thereby adjusting the height of the gutter above the surface to be cleaned. A rotating auger is installed inside the chute. It has a transverse arrangement, and its blades are made in a helical shape and are installed so as to rake snow into the middle of the bucket. The blades are metal and allow you to grind even stale frozen snow. There is a fan behind the chute with the auger. It is placed in the body of the snow blower. At its output, a special chute for throwing snow and a reflector are mounted, with which you can direct the ejection and adjust its range within the limits of possibilities.

The controls of the Huter SGC 4000E snow blower are represented by an arched closed handle, firmly fixed to the body on both sides. Its transverse part is designed to hold and direct movement, and the main control elements are mounted on the side rods. These are levers for turning on the drives to the auger, to the wheels, and to control the throttle valve. Below the handle there is a gear shift lever (4 forward and 2 reverse), as well as adjustment of the direction of snow ejection.

The chassis is a drive axle connected to the engine through a clutch and gearbox. The axle is equipped with a pair of wheels with steel rims and pneumatic tires with a pronounced “winter” tread.

Moving forward, the snow blower grabs the snow located in front of it with a chute. The snow falls on the auger blades, is crushed and raked into the middle, directly to the fan inlet. A rapidly rotating fan creates a powerful air flow that removes snow that enters it. Thus, moving forward, the unit moves the snow that gets in its path far to the side.

Preparing for work

The Huter SGC 4000E snow blower is not complicated in design, and the operator can easily cope with its control after first studying the appropriate operating instructions. Many bright and informative stickers will help you with this. Considering that the unit is a potential source of danger (self-propelled, presence of rotating parts, etc.), you should carefully study the safety regulations when working with it.

The initial assembly of the snow blower and its preparation for operation should also be carried out in accordance with the description from the technical documentation. This will allow you to avoid emergency situations and effectively use the device in the future.

Before starting the engine, it is necessary to ensure a sufficient oil level in the crankcase and fill the tank with AI-92 unleaded gasoline. Particular care should be taken with gasoline, as it can easily ignite from an accidental spark, even in severe frost conditions.

The engine is started manually or using a 220 V electric starter. First, make sure that the wheel drives and auger are turned off, turn on the ignition, open the fuel valve and close the air damper. As the engine warms up, the choke valve opens. After warming up, the engine is ready for operation.

To extend the service life of the Huter SGC 4000E snow blower, you must strictly follow the manufacturer's recommendations regarding operating mode, storage, necessary consumables and maintenance periods. Warranty service for the unit is provided by authorized workshops for 12 months after its official sale to the consumer.

Features and benefits of the Huter SGC 4000E snow blower

• The Huter SGC 4000E snow blower is self-propelled and is equipped with inflatable driving wheels with tires with a pronounced winter tread, which ensures reliable contact with the surface even in icy conditions.
• It is possible to quickly, almost on the fly, adjust the direction of snow ejection.
• Durable metal auger blades make it easy to crush even compacted and frozen snow.
• Restrictive shoes on the edges of the receiving chute protect it from damage and allow you to adjust the height from the surface to its bottom edge.
• The four-stroke gasoline engine has enough power to easily cope with all the loads associated with the work process of the snow blower and its movement.
• The fuel tank is located in a convenient location and has a wide neck, which makes filling it with gasoline easier.
• The snow blower is completely autonomous and does not require external energy sources.

Specifications

• Engine: 4-stroke, single-cylinder
• Starter: manual starter/electric start from 220 V
• Motor power: 4000 W
• Power: 6.5 hp
• Speeds: 4 forward / 2 reverse
• Working width: 56 cm
• Grip height: 42 cm
• Fuel tank capacity: 3.0 l
• Type of movement: self-propelled
• Availability of headlight: no
• Weight: 67 kg

Specifications

The Huter SGC 4100 snow blower has the following technical characteristics:

• number of speeds: 5/2;
• snow clearing lane width - 56 cm;
• the height of the snow layer that can be captured by a snowplow is 51 cm;
• fuel tank capacity - 3.6 l;
• packed dimensions: length 90 cm, width 63 cm, height 62 cm;
• weight of the Huter SGC 4100 snow blower - 73 kg;
• there is an anti-corrosion coating on the body;
• starting is carried out using a manual starter;
• material of auger knives - steel;
• the snow thrower is equipped with large wheels with a rough pattern for high-quality traction with the ground;
• there is a cold start function;
• the lifting height of the snow blower is regulated by special shoes fixed at the desired height;
• The machine is delivered with the gearbox and engine crankcase unfilled with oil;
• It is recommended to use special high-quality oil to lubricate the gearbox.
• Features of the huter sgc 4100 snow blower

According to the instructions, the Huter SGC 4100 snow blower consists of the following elements:

• wheel and auger drive levers;
• other levers (switching speed, turning the chute, tilting the reflector, turning the snow blower to the right and left - are attached to the handles on both sides);
• snow chute;
• steel auger;
• control handle;
• limit shoes;
• two wheels;
• reflector;
• snow fence;
• brush for cleaning snow from the surface of the car.

Assemble the Huter SGC 4100 snow blower according to the instructions, observing the order in which the components are installed. For the longest service life of your snow blower, follow these operating and maintenance rules for the Hooter 4100:

• To fill the engine with oil, use 5W30 type mineral oil in an amount of 0.6 l;
• check the oil level before each start; if the oil was in the crankcase for more than a month and the equipment was idle, replace the oil with fresh one;
• Before starting work, check the tire pressure level, normally it will be 1 bar;
• do not work on cheap, low-quality gasoline, use fuel of a grade not lower than AI-92;
• set the position of the limit shoes for more convenient movement of the snow thrower;
• constantly lubricate the turning mechanism of the chute with lithol, this will improve the turning speed and, consequently, the productivity of the machine;
• Try to start the snow blower according to the manual, warm up the engine before starting snow removal;
• Carry out repairs to the snow blower only at an authorized service center; after the warranty period has expired, repairs can be carried out by the owner.

The maintenance period for the Huter SGC 4100 snow blower is every day before use.

Snow blower Huter SGC 4000

The Huter 4000 snow blower is a self-propelled machine with a gasoline power unit and belongs to the semi-professional class.
It is recommended to use the machine to clean areas up to 3000 square meters. m. Snow blower Huter (Huter) SGC 6000: technical characteristics, price, reviews, video, photo, instructions.

Snow blower Huter SGC 4100 here.

Main faults of the model

Engine won't start

1. The tank has run out of fuel (fill in a new one).
2. The fuel valve is closed (open it).
3. The high-voltage wire is not connected to the spark plugs (connect them).
4. The air damper is in the wrong position (turn the lever and close the damper).

Snow blower does not throw snow

1. The chute is clogged (turn off the engine and remove the spark plug, remove the accumulated snow and ice from the chute, clean the inside of the snow intake).
2. The auger activation cable is not adjusted (adjust the cable position).

1. Auger deformation (tighten all connections).

Reviews from owners of huter sgc 4100 snow blowers

Roman, 56 years old, Chernigov:
“The Hooter is a good option for use at the dacha, in a country house. It really helps during the snowy season. When not needed, it is kept in the garage out of season, although my neighbor simply stores similar equipment under a tarpaulin near the barn.

Advantages of the Huter SGC 4100: optimal power, good speed range, easy to operate and has not yet required complex repairs.

Disadvantages: the height of the handle is not adjustable; for my height I would like to put it a little higher. Among the procedures carried out, I added oil and cleaned the air filter.”

Alexander, 41 years old, Perm:

“I bought this model via the Internet, despite the country of origin, China, and I am pleased with the performance characteristics. I note from personal experience that owners of winter equipment often complain about rust and corrosion. You just need to lubricate all the leading parts on time, pour good oil and the equipment will work flawlessly.

The only repair work was replacing the spark plug and replacing the air filter, but this was all done after the warranty period had expired. I read reviews about Hooter on the forums and they were negative, saying that the machine no longer cleans but rather throws snow. The main thing here is to learn how to use it correctly, read the forum, watch videos of other owners, and everything will become clear.”

Vladimir, 29 years old, Dnepr:

“I bought a Huter snow blower of this model that was already used, but in good condition. I am very pleased with the purchase and the investment overall. The equipment is of high quality, despite the Chinese assembly. During the time that I have had the snow blower, which is already more than two years, I have used it to its fullest throughout the entire winter season, while there was snow!

One refill is enough for an average of 3 hours of operation, even more if with periodic shutdowns. The build quality is decent. The downside is that on slippery ice it sometimes slips when turning. Another advantage is easy maintenance. I downloaded the original instructions for it on the forum, and I’m doing everything according to the manual.”

Huter SGC 4000

Warranty and service official guarantee at the company service center

Description

Features and benefits of the Huter SGC 4000 snow blower

• The Huter SGC 4000 snow blower is self-propelled and is equipped with inflatable driving wheels with tires with a pronounced winter tread, which ensures reliable contact with the surface even in icy conditions.
• It is possible to quickly, almost on the fly, adjust the direction of snow ejection.
• Durable metal auger blades make it easy to crush even compacted and frozen snow.
• Restrictive shoes on the edges of the receiving chute protect it from damage and allow you to adjust the height from the surface to its bottom edge.
• The four-stroke gasoline engine has enough power to easily cope with all the loads associated with the work process of the snow blower and its movement.
• The fuel tank is located in a convenient location and has a wide neck, which makes filling it with gasoline easier.
• The snow blower is completely autonomous and does not require external energy sources.

General information

The Huter SGC 4000 gasoline snow blower
is a development of German engineers, designed for quickly removing snow cover in relatively small areas (near a country house, in a parking lot, walking path, etc.). The device is self-propelled, that is, not only its working units, but also the support wheels are driven by a fairly powerful (5.5 hp) four-stroke air-cooled piston gasoline engine with a manual starter. The engine is equipped with a 3-liter fuel tank for AI-92 gasoline, as well as a system that makes it easy to start it at fairly low ambient temperatures. The operator just needs to select one of 4 gears for forward movement, or one of 2 reverse gears, and then only give the snow blower the desired direction using the handle.

Pneumatic tires, which are equipped with a pair of support wheels of the unit, have a special “winter” tread, which provides sufficient traction with a snowy surface even in icy conditions, practically does not allow slipping and allows the traction forces of the engine to be fully realized.

The working part of a gasoline snow blower is represented by a two-stage auger-fan system. Its ejection chute with reflector can be rotated and fixed in any direction within a range of 180 degrees, and the fan is capable of throwing crushed snow up to 13 meters from the cleaning site. The installation height of the receiving chute from the surface to be cleaned is adjusted manually. The throw distance of the removed snow can also be adjusted manually by adjusting the reflector. In one pass, the Huter SGC 4000 snow blower is capable of clearing snow cover up to 420 mm thick from a strip 560 mm wide.

Device and principle of operation

The Huter SGC 4000 snow blower is quite convenient and easy to operate.
This is achieved due to the rational and balanced placement of its drive, operating systems and controls relative to the axis with wheels. The general design is a base frame mounted on two wheels, in the front part of which a receiving chute with an auger is mounted, and in the rear part there is a guide handle and controls. On top there is a gasoline drive and a throwing system (fan with reflector). All external surfaces, including the auger blades, have a durable and effective anti-corrosion coating. This is especially true given the environment they will be dealing with. The power plant of the snow blower is a four-stroke piston single-cylinder gasoline engine of the Huter 168F OHV brand, air-cooled. The nominal 5.5 hp it develops. the power is sufficient to provide mechanical energy to the working units and movement of the entire structure. The engine is lubricated with oil from the crankcase forcibly. The motor is started manually using a cable starter. The engine power system is designed in such a way that it can be easily started even when cold in subzero temperatures. A fuel tank of 3 liters of gasoline allows you to work without refueling for quite a long period, depending on the load. The working part of the snow blower begins with a catching chute made of durable sheet steel. It is made in the form of a bucket with the open part forward. At the bottom, on both sides, special support shoes are attached to its body. Each of them can be lowered or raised, thereby adjusting the height of the gutter above the surface to be cleaned. A rotating auger is installed inside the chute. It has a transverse arrangement, and its blades are made in a helical shape and are installed so as to rake snow into the middle of the bucket. The blades are metal and allow you to grind even stale frozen snow. There is a fan behind the chute with the auger. It is placed in the body of the snow blower. At its output, a special chute for throwing snow and a reflector are mounted, with which you can direct the ejection and adjust its range within the limits of possibilities. The controls of the Huter SGC 4000 snow blower are represented by an arched closed handle, firmly fixed to the body on both sides. Its transverse part is designed to hold and direct movement, and the main control elements are mounted on the side rods. These are levers for turning on the drives to the auger, to the wheels, and to control the throttle valve. Below the handle there is a gear shift lever (4 forward and 2 reverse), as well as adjustment of the direction of snow ejection.

The chassis is a drive axle connected to the engine through a clutch and gearbox. The axle is equipped with a pair of wheels with steel rims and pneumatic tires with a pronounced “winter” tread.

Moving forward, the snow blower grabs the snow located in front of it with a chute. The snow falls on the auger blades, is crushed and raked into the middle, directly to the fan inlet. A rapidly rotating fan creates a powerful air flow that removes snow that enters it. Thus, moving forward, the unit moves the snow that gets in its path far to the side.

Preparing for work

The Huter SGC 4000 snow blower is not complicated in design, and the operator can easily cope with its control by first studying the appropriate operating instructions. Many bright and informative stickers will help you with this. Considering that the unit is a potential source of danger (self-propelled, presence of rotating parts, etc.), you should carefully study the safety provisions when working with it.

The initial assembly of the snow blower and its preparation for operation should also be carried out in accordance with the description from the technical documentation. This will allow you to avoid emergency situations and effectively use the device in the future.

Before starting the engine, it is necessary to ensure a sufficient oil level in the crankcase and fill the tank with AI-92 unleaded gasoline. Particular care should be taken with gasoline, as it can easily ignite from an accidental spark, even in severe frost conditions.

The engine is started manually. First, make sure that the wheel drives and auger are turned off, turn on the ignition, open the fuel valve and close the air damper. As the engine warms up, the choke valve opens. After warming up, the engine is ready for operation.

To extend the service life of the Huter SGC 4000 snow blower, you must strictly follow the manufacturer's recommendations regarding operating mode, storage, necessary consumables and maintenance periods. Warranty service for the unit is provided by authorized workshops for 12 months after its official sale to the consumer.

Snow blower Hooter 4100 characteristics

Throws snow up to 15 meters in the direction specified by the operator. The dimensions of the fence gutter allow you to clear a strip 56 cm wide of snow up to 51 cm thick in one pass.

The gearbox is designed for 5 forward speeds and two for reverse.

Technical characteristics of the huter sgc 4100 snow blower,

huter sgc 4100L

The Huter SGC 4100L snow blower differs from the SGC 4100 model in the presence of a headlight for working in the dark and when there is a lack of light in the morning and evening hours.

1. Engine oil mineral 5w30

2. Lubricant for the gearbox - litol 24 or equivalent

3. Gasoline - AI - 92

4. Belt for auger - A33 (838Li); LB4L885. For models from 2020 A32.5 (825Li); 4LXP855 (information from various sites, not from instructions and details)

Gasoline snow blower huter sgc 4100L - operating instructions: download.

Gasoline snow blower huter sgc 4100 - operating instructions - download

Snow blower Huter sgc 2000e

Another model of the electric snow cleaner is the SGC 2000E. It will be a good purchase if you need to regularly and quickly clear the area near a small house or garage from snow. A special lever allows you to adjust how far the snow will be thrown and in which direction. The auger on this machine is single-stage, which means it also acts as a rotor and throws away snow.

The Huter sgc 2000e electric snow blower is equipped with a 2 kW motor, a working snow width of 40 cm and a height of 16 cm. Like the previous model, it belongs to the class of non-self-propelled single-stage snow blowers. But its technical characteristics: a 2 times more powerful motor and 1.5 times more grip allow you to remove snow much faster and more efficiently than with the sgc1000e.

The Sgc 2000e model weighs 12 kg. That's almost double the size of the sgc1000e, but it's one of the best for a snow blower of this power and performance. Unlike the previous model, the sgc 2000e can even remove compacted snow if it is not cemented into a single mass, and at the same time it is just as gentle and gentle on the surface being removed, be it asphalt, paving slabs or wood.

Huter SGC 4100

Warranty and service official guarantee at the company service center

Description

Features and benefits of the Huter SGC 4100 snow blower

• The Huter SGC 4100 snow blower can work autonomously in harsh winter conditions thanks to the fuel reserve in the tank and a reliable engine with a cold start system.
• The direction of ejection of the removed snow can be adjusted on the go using a special rotating handle.
• Durable steel auger blades can easily handle even compacted and frozen snow.
• In the lower part, the receiving chute of the unit has guide shoes that allow you to fix the height of its lifting and protect the lower edge from mechanical damage.
• Thanks to the special tread on the tires of the supporting drive wheels, slipping is practically not allowed, and the traction capabilities of the engine are used to the maximum.
• The torque from the engine to the screw is transmitted through a reliable worm gear.

General information

The Huter SGC 4100 snow blower
is a convenient, compact and, at the same time, powerful and productive unit, with which you can easily clear snow from relatively small areas around the house, parking lots, driveways, walkways, etc. A pair of support wheels of the device are connected to the power unit, which makes it self-propelled. The wheels themselves are inflatable, and their tires have a special tread that allows you to have reliable contact with the surface and practically prevent slipping. The operator just needs to walk behind the snow blower and, holding the control handle, control the desired direction of its movement. The power unit used here is a fairly powerful and reliable four-stroke gasoline internal combustion engine with a power of 5.5 hp. air-cooled and manually started. A special system will allow you to start the engine even at very low outside temperatures. The fuel supply (AI-92 gasoline) in the tank with a capacity of 3.6 liters allows you to work quietly without being distracted by frequent refueling. The equipment also has a gearbox designed for 5 forward gears and two for reverse.

To perform its function, the Huter SGC 4100 snow blower has a working system, represented by an intake chute with a rotating auger and a powerful fan. Thanks to the steel auger blades, it is possible to clean and crush even compacted and frozen snow. Through a special box (deflector), the fan throws snow at a distance of up to 15 meters in the direction set by the operator. The dimensions of the fence gutter allow you to clear a strip 56 cm wide of snow up to 51 cm thick in one pass.

The strength of the entire structure is provided by a tightly welded supporting frame with an arched handle, on which the levers for turning on the wheel drives and the working system (auger and fan) are located. The power unit, chassis and the working system itself are mounted on the frame.

Device and principle of operation

Like any German-developed equipment, the Huter SGC 4100 snow blower is distinguished by high quality, reliability and ease of use. This result is achieved thanks to clear calculations and correct weight distribution of the component parts of the unit relative to the supporting axis. All components and assemblies of the machine are installed on a steel supporting frame, to which a wide arched handle is attached. All working external metal parts of the device are coated with a high-quality anti-corrosion compound that protects them from moisture and possible aggressive impurities.

The snow blower's controls are represented by two levers on the handle, which are designed to turn on and off the wheel drives and the working system. Below there is a gear shift lever, as well as a rotary handle for rotating and fixing the deflector through which the removed snow is ejected.

The power plant is located on top of the frame. In this case, it is a four-stroke piston single-cylinder air-cooled internal combustion gasoline engine. The engine has a fuel tank of 3.6 liters of gasoline and is equipped with an air filter and muffler. Considering the conditions in which the unit is expected to operate, a cold start system will be very useful, allowing you to start the engine even at fairly low air temperatures. The engine is lubricated by spraying oil from the crankcase onto its internal parts. The engine is started using a manually driven starter.

The working system of the Huter SGC 4100 snow blower is driven by an engine and consists of an intake chute with an auger, as well as a fan with a deflector and a guide. The chute is stationary and looks like a loader bucket. In its lower part, on both sides, there are two guide shoes, with the help of which you can set the gap between the lower edge and the surface to be cleaned. The transverse auger mounted inside the chute is equipped with durable metal knives in the shape of a spiral. The configuration of these spirals is such that they not only ensure grinding (if necessary) of snow, but also collect it towards the middle, where it falls into a powerful air stream created by a rotating fan. The snow picked up by this jet is thrown out through the deflector to a distance of up to 15 meters. This distance can be adjusted using the guide. The deflector itself can rotate, making it possible to throw snow in the desired direction.

The transmission of the unit consists of a five-speed gearbox with two reverse gears, a clutch, a shaft and a differential on the support axle. The last of the five gears is used, as a rule, for transportation. The clutch remains disengaged until the operator presses the corresponding lever against the handle. The differential is locked. This increases cross-country ability. It can also be unlocked for ease of turning on a non-slip surface and increasing maneuverability.

The axle of the snow blower rests on two wheels. The wheels are equipped with metal rims, inflatable tubes and tires with an aggressive “winter” tread. The tubes provide softness, and the tread allows you to move forward with virtually no slipping, even if there is ice under a layer of snow.

Moving forward, the unit captures the snow with a chute, where it is crushed and sent to the fan, which removes it away from the cleaning site.

Preparing for work

The Huter SGC 4100 snow blower is usually operated in winter, and therefore close to extreme, conditions. Therefore, serious attention must be paid to its assembly and preparation for work, since adjusting something in the cold is not a pleasant task. It follows from this that before proceeding with such operations, you should carefully study (or refresh your memory) the relevant provisions from the snow blower operating instructions included in the kit. There are no particularly difficult aspects in controlling the operation of the device, so almost any healthy adult can handle it.

Taking into account the fact that a running unit is a potential source of injury due to the presence of rotating parts, special attention must be paid to studying the safety provisions when working with such a mechanism. Strict adherence to these provisions will maximally protect the operator from unpleasant consequences.

When refueling or refueling the unit’s fuel tank, you should not forget that the gasoline on which its engine runs is a toxic and flammable liquid. Even low air temperatures will not prevent a strong fire from a possible accidental spark. Gasoline also evaporates easily, and its vapors are explosive. Therefore, working with this liquid requires increased attention.

To extend the service life and maintain the snow blower in working condition, it is necessary to use only gasoline and oil recommended by the manufacturer, carry out timely maintenance and preventive maintenance, and also use the unit only for its intended purpose. The warranty period for the Huter SGC 4100 snow blower is established by the manufacturer and is 1 year from the date of sale.

Petrol snow blower HUTER SGC 6000

The powerful gasoline snow blower Huter SGC 6000 is designed for clearing large areas. Self-propelled, equipped with a 4-stroke engine 8 hp. The metal auger can crush dense snow. To prevent damage to the bucket, skids are provided. The gutter is adjusted using a special lever. The control is located on the operator panel. There is a headlight for illumination when working in the dark.

The working system of the Huter snow blower consists of a snow chute with an auger, as well as an impeller-shaped fan and a snow ejection chute (except SGC 3000). The unit is powered by a four-stroke piston single-cylinder air-cooled internal combustion gasoline engine.

Advantages of the Huter snow blower:

• The engine is 4-stroke, gasoline with overhead valves, adapted for operation at low temperatures, and has sufficient power to easily cope with all the loads associated with the work process of the snow blower and its movement. It is completely autonomous and does not require external energy sources, which makes the snow blower mobile.

• Huter snow blowers are self-propelled (except for the SGC 3000 model) and are equipped with inflatable drive wheels with tires with a pronounced winter tread, which ensures reliable contact with the surface even in icy conditions and makes operation easy. The SGC 8100C model is equipped with tracks, which provides even greater maneuverability.

• An electric starter (SGC 4800, 4800V from a 12V battery, and for SGC 4000E, 4800E, 6000, 8100, 8100C from a 220V network) allows you to start the engine without extra effort.

• Adjusting the direction of snow ejection using the handle allows you to do it quickly, almost on the go.

• Durable metal auger blades make it easy to crush even compacted and frozen snow and reduce its volume.

• Restrictive shoes on the edges of the receiving chute protect it from damage and allow you to adjust the height from the surface to its bottom edge, which allows you to use the snow blower on different surfaces.

• A bright headlight will allow you to work in winter twilight conditions (for models SGC 4000L, 4800, 6000, 8100, 8100C).

• Heated handles (for models SGC 6000, 8100C) make it possible to operate the snow blower without special equipment in cold weather.

• The planetary mechanism on the 8100C model makes it possible to brake one of the wheels. The “hooks” on the control panel engage the differential and suspend the corresponding wheel. As a result, the snow blower turns itself, without the operator making any effort.

When working with a snow blower, it is important to remember:

• The speed must be changed with the snow blower at a complete stop and the drive lever lowered.
• Running the engine and idling can damage the snow blower and increases wear on the auger drive belt.
• Operation at temperatures above 0ºС is possible, but we do not recommend it, because... the snow becomes “sticky” and clogs the ducts.
• Adjusting the cables is important, affects the service life and should be carried out by specialists.
• All Huter snow blowers have a paper filter element and at temperatures around 0ºC it can get wet and ice up. In this case, it needs to be removed and “dried”.
• If the snow blower is stored in an unheated room, it is necessary to clear it of adhered snow after use.

Snow blower Huter SGC 4100L petrol, 6.5 hp.

Description

Snow blower Huter SGC 4100L

is a convenient, compact and, at the same time, powerful and productive unit, with which you can easily clear snow from relatively small areas around the house, parking lots, driveways, pedestrian paths, etc. A pair of support wheels of the device are connected to the power unit, which makes it self-propelled. The wheels themselves are inflatable, and their tires have a special tread that allows you to have reliable contact with the surface and practically prevent slipping. The operator just needs to walk behind the snow blower and, holding the control handle, control the desired direction of its movement.

The power unit used here is a fairly powerful and reliable four-stroke gasoline internal combustion engine with a power of 5.5 hp. air-cooled and manually started. A special system will allow you to start the engine even at very low outside temperatures. The fuel supply (AI-92 gasoline) in the tank with a capacity of 3.6 liters allows you to work quietly without being distracted by frequent refueling. The equipment also has a gearbox designed for 5 forward gears and two for reverse.

To perform its function, the Huter SGC 4100L snow blower has a working system, represented by an intake chute with a rotating auger and a powerful fan. Thanks to the steel auger blades, it is possible to clean and crush even compacted and frozen snow. Through a special box (deflector), the fan throws snow at a distance of up to 15 meters in the direction set by the operator. The dimensions of the fence gutter allow you to clear a strip 56 cm wide of snow up to 54 cm thick in one pass.

The strength of the entire structure is provided by a tightly welded supporting frame with an arched handle, on which the levers for turning on the wheel drives and the working system (auger and fan) are located. The power unit, chassis and the working system itself are mounted on the frame.

Preparing for work

The Huter SGC 4100L snow blower is usually used in winter, and therefore close to extreme, conditions. Therefore, serious attention must be paid to its assembly and preparation for work, since adjusting something in the cold is not a pleasant task. It follows from this that before proceeding with such operations, you should carefully study (or refresh your memory) the relevant provisions from the snow blower operating instructions included in the kit. There are no particularly difficult aspects in controlling the operation of the device, so almost any healthy adult can handle it.

Taking into account the fact that a running unit is a potential source of injury due to the presence of rotating parts, special attention must be paid to studying the safety provisions when working with such a mechanism. Strict adherence to these provisions will maximally protect the operator from unpleasant consequences.

When refueling or refueling the unit’s fuel tank, you should not forget that the gasoline on which its engine runs is a toxic and flammable liquid. Even low air temperatures will not prevent a strong fire from a possible accidental spark. Gasoline also evaporates easily, and its vapors are explosive. Therefore, working with this liquid requires increased attention.

To extend the service life and maintain the snow blower in working condition, it is necessary to use only gasoline and oil recommended by the manufacturer, carry out timely maintenance and preventive maintenance, and also use the unit only for its intended purpose.

• The engine is 4-stroke, single-cylinder.
• Speeds 5 forward / 2 reverse.
• Fuel tank volume 3.6 l.

Snow blower Huter SGC 4000 Huter

Reviews

— Yuri Ch.

Pros: Not broken yet

Cons: They exist (details in the comments)

Comment: Brought it from the store, filled it up, tightened the cables, started it up... But it doesn’t throw snow. It turned out that the belt was so long that no adjustments could make the rotor rotate under load. I took off the belt, and it was all cracked; in general, the belt turned out to be far from the first freshness. I think it’s unlikely that the factory installs old, stretched belts, even if they are made in China. So this complaint is against the Cascade store. I bought a belt, 100 rubles. I didn’t order the original because the price was 1100 rubles. seemed inadequate to me. The cables were also not the first freshness. In places of bending, on the roller near the cables, the jacket is torn, in some places the jacket is all cracked. And again, a complaint against the Cascade store. I am sure that this cannot happen with a new thing. And now, 2 days after purchasing the snow blower, I managed to clear snow for the first time! I didn’t expect miracles from it, fresh snow cleans quite well. But the one that has compacted or melted will no longer take it. The ideal snowdrift for this snow blower is fresh snow, up to 20 cm high. With such conditions, the snow is easily removed, it flies off 8 meters, wet snow 1-2 meters and the gutter constantly gets clogged. It goes well, 4 speeds contribute to this, the difference between 3 and 4 is not noticeable, but in reverse, it’s very slow! During operation, the gas tank cap constantly opens, and then you have to look for it. As soon as the outside temperature dropped to -18, the snow blower refused to work again. The reason is frozen lubricant in the gearbox. I had to change the lubricant. Now even at -30 everything works. I wouldn’t buy it a second time and wouldn’t recommend it to anyone! Even if there were no problems with the belt, cables, lubrication, floating speed, opening the gas tank cap, etc. I would have taken a closer look at more powerful models. Judging by the reviews on the Internet, this snow blower has problems and they all have the same problems. Apparently, for this money you won’t be able to buy a snow blower without any problems!

— Kalikin Kirill

Pros: Good unit. It takes 2 hours to handle a shovel, and I can handle a snow blower in about 15 minutes. At -20, it starts the second time. Throws 5-10 meters. The sea saves strength.

Cons: It’s better to pay a little extra and take the 4100; it has a higher grip; you can throw deeper snowdrifts. It is necessary to modify the air intake so that moist air from the snow melting on the muffler does not enter the carburetor, otherwise the engine speed will begin to fluctuate. Treated by heating with a hair dryer.

Comment: A decent unit at a reasonable price. Analogues seem to be made at the same factory. Everyone looks like twins.

— Vladlen Z.

Pros: Convenient to fill with fuel. Restrictive shoes reliably protect from damage.

Comment: I am clearing snow in the parking lot, next to the medical center. center. It is self-propelled, there is no need to drag it by force. Wheels with winter tread do not slip on ice and do not get stuck in snow.

Show all reviews about Snow blower Huter SGC 4000 Huter
Reviews Snow blower Huter SGC 4000 Huter Show all reviews Snow blower Huter SGC 4000 Huter