LIEBHER 250 TONS MOTOR CRANE technical characteristics and rental


Specifications

The following models of this unit are available on the market:

  • based on KAMAZ;
  • based on the Ural;
  • based on MAZ.

The technical characteristics of the Ivanovets truck crane depend on the selected option and modification.

Based on KamAZ

Technical indicators:

Operating temperature-40…+40°С
Maximum carrying capacity of dangerous goods, t20
Maximum weight of lifted loads, t25
Workspace angle240°
Load moment75 t/m
ControlUsing a lever
Crane boom typeBent profile, ovoid
Wheel formula6*4
Maximum travel speed, km/h60
Maximum boom reach, m20
GusekYes
Boom length, m21
Speed ​​during lifting and lowering of the crane, m/min6
Engine power240 horsepower
Lifting height with jib, mUntil 21
Height, m3,6
Length, m11
Width, m2,5
Weight, t20

The Ivanovets 25 ton truck crane based on KamAZ is designed to perform the following types of work:

  • laying pipelines;
  • work at sites with difficult access;
  • laying gas and oil pipelines;
  • unloading and loading of dangerous goods;
  • performing construction and installation work.

This unit is equipped with an all-terrain chassis and an ONK-160 safety device, which helps the operator navigate when loading and during other work.

The characteristics of the Ivanovets 25 ton truck crane exceed those of similar models of truck cranes.

Based on URAL

Specifications:

Wheel formula6*6
Engine power210 horsepower
Maximum load capacity, t14
Load moment14 t/m
Crane height with boom, m14,5
Boom length, m14
Maximum speed, km/h60
Speed ​​during loading and unloading operations, m/minFrom 0.2 to 10
Control typeUsing a lever
ChassisUral 4320
Number of sections3
Support contour size, m4,95*5,6
Operating temperature range-40…+40°С
engine's typeDiesel
Center lockYes
Interwheel lockingNo
Average fuel consumption49 l per 100 km, when operating in crane mode - 9.3 l/h
Fuel tank capacity, l230
Boom radius, m19
Load capacity with dangerous goods, t20
Jib transport methodseparately transportable
Dimensions, m9,91*2,5*3,36
Weight, t17,8

The boom design consists of curved profiles. The equipment is equipped with an ONK-160 safety device. The rotation speed of the turning part is 1.9 revolutions per minute.

The URAL Ivanovets truck crane has all-wheel drive with a center differential lock and a five-speed manual gearbox.

Based on MAZ

MAZ Ivanovets has the following technical indicators:

Maximum load capacity, t17
Load moment48 t/m
Type of installed boomTelescopic
Number of sections2
Boom size, mFrom 8 to 14
Jib size, m7
Lifting height with boom, mUp to 14.5
Lifting height with boom and jib, mUp to 21.5
Rotation speed of the crane rotating mechanism, rpm2,5
Speed, km/hUp to 60
Wheel formula4*2
ChassisMAZ-5337
Maximum boom extensionUp to 18 meters
ControlUsing a lever
Working temperature-40…+40°С
Engine power180 horsepower
Type of fuel usedDiesel
Dimensions, m10*2,5*3,9
Weight, t16,42

The MAZ-based equipment is equipped with a power unit with 6 hydraulic cylinders, as well as a five-speed manual gearbox and a microprocessor-based load limiter.

Such a processor makes it possible to monitor the following indicators:

  • load level;
  • boom length and reach;
  • mass of cargo on the hook;
  • lifting height.

The drive is a hydraulic pump that is connected to the engine of the vehicle chassis. In order to increase the length of the base equipment, a lattice jib is installed here.

Arena truck crane 25 tons, Ivanovets

COST OF SERVICES from: , DISCOUNTS, CONDITIONS ->>


Truck crane 25 tons KC-45717K-1P Ivanovets based on a KAMAZ is one of the most popular truck cranes in Minsk and the Minsk region. It is distinguished by high performance and taking into account the fact that the chassis has reinforced components and assemblies. This is a very reliable car that works great on all types of roads. Due to its relatively small size, it is possible to carry out loading and unloading operations in fairly cramped conditions.

telescopic
boom, 4 sections, length 30.7 m , the longest in its class. The crane can be equipped with a 9.0 m long jib , which can be tilted by 30°.
The drive of the crane mechanisms is hydraulic from an axial piston pump driven by the chassis engine. A microprocessor-based load limiter (LCL) allows you to monitor the degree of crane loading, the length and reach of the boom, and the lifting height of the boom head; shows the actual weight of the load on the hook and the maximum lifting capacity at a given reach; automatically, according to specified coordinates, limits the crane’s coverage area when working in cramped conditions and near power lines. Are you having trouble choosing the truck crane you need? Call the hot-line and qualified specialists will advise you for FREE!

Main technical characteristics of the crane installation:
ModelKS 45717K-1P Ivanovets
Load capacity25t
Maximum boom reach (with jib), m30,7 (39,7)
Maximum lifting height (with jib), m32 (40)
Maximum lowering depth25m
Boom length, m9,9 — 30,7
Jib length, m9,0
Work area240° and 360°
Support contour, m6.0x5.43 2.26x5.43
Truck crane chassis:
Basic chassisKAMAZ
Wheel formula6x4
Number of axes3
Movement speed60
Length, mm.11945
Width, mm.2500
Height, mm.3970
Weight in transport position, t23.2 t
Additional characteristics of the crane installation:
Load moment, tm.84,8
Nominal speed of lifting (lowering) the load with pulley multiplicity K=8, m/min:7,4-40,0
Load landing speed, m/min.0,2
Rotation speed of the rotary part, rpm.1,9
Load lifting (lowering) speed, m/min.7,4
Truck crane rental price:
Truck crane 25t without jib *Subscription (departure within the Moscow Ring Road = 1 hour + 3 hours) **At distances from 100 km (from base to base) ***Up to 100 km, according to the formulaTotal 288 rubles; (+72 RUR/hour) / 345.60 with VAT **1.80 RUR/km / 2.16 with VAT 20% (example ≈ 200 km = 360 RUR + minimum 4 n/h of work + toll road collection
25t truck crane with jib *Subscription (departure within the Moscow Ring Road = 1 hour + 4 hours) **At distances from 100 km (from base to base) ***Up to 100 km, according to the formulaTotal 375 rubles; (+75 RUR/hour) / 450 with VAT **1.80 RUR/km / 2.16 with VAT 20% (example ≈ 200 km = 360 RUR + minimum 4 n/h of work + toll road collection
***Up to 100 km, according to the formula Price = ((Σ mileage (from base to base) km/50)*Cost of an hour) + (Σ hours of work*Cost of an hour)
SPECIAL PRICE (CHECK MANAGER FOR CONDITIONS)from 70 rub without VAT / 1 hour
Toll roads3 axles x0.115€/km
BargainAppropriate
DiscountCheck
Replacement of a rented truck craneYes
*Prices and conditions are subject to change, call our manager who will make the correct calculation!

Rent a 25 ton truck crane in Minsk , Minsk region, Minsk region.

Other company offers for the “truck crane rental” service

Rent a truck crane 14 tons, 14 meters, Ivanovets, Price

Rent a truck crane 15 tons, 20 meters, Masheka, Price

Rent a truck crane 16 tons, 21 meters, Masheka, Price

Rent a truck crane 25 tons, 28 meters, Klintsy, Price

Rent a truck crane 25 tons, 30 meters, Klintsy, Price

Modifications

Modifications of this technical tool:

  • Truck crane Ivanovets 16 tons. This modification is equipped with a telescopic three-section boom. The maximum lifting capacity is 16 tons. The drive of the crane mechanisms is hydraulic from a pump driven by the chassis engine. Used for loading and unloading operations within the city.
  • Ivanovets 25 tons. A four-section boom up to 22 m long is installed here. It helps transport loads to the required height. Hydraulic cylinders and pulleys ensure precision when performing operations to move goods. This modification has design differences, for example, an ergonomic control system.
  • Truck crane Ivanovets 14 tons. An electric drive is installed here. Electricity is generated by an alternating current generator (voltage - 380 V). It operates via a power take-off from the engine to the chassis. Each of the mechanisms is brought into working condition by a separately located electric motor, which makes it possible to combine work operations. The maximum load capacity is 14 tons.
  • Ivanovets 50 tons. This modification of the crane has a five-section telescopic boom with an ovoid profile. The design is equipped with a jib 9 or 15 m long. The boom extension can be up to 36 m. The equipment is equipped with 2 rear drive axles and a diesel engine.


Similar special equipment

Liebherr truck crane 250 tons technical specifications

allow the unit to perform such work, which until now was inaccessible to most mobile cranes.
Nowadays the situation is such that the use of heavy-duty wheeled cranes has gone far beyond the city limits. Hundreds of construction enterprises and many others were able to appreciate the advantages of this technology. Truck cranes with a lifting weight of more than 100 tons. can be called a fairly young type of equipment, but it has already managed to displace the old-timers, like tower and crawler cranes
on the market. Great variety is also one of the key reasons for a company to gain popularity in the market.

What are the advantages of large wheel crane:
  • combining mobility and power of the installation
  • the ability to use technology even in the city
  • ease of delivery and deployment
  • To operate such a machine, only 1 crane operator is required
  • modern machine control
  • efficient and fast execution of urgent orders
  • work in limited areas
  • uninterrupted functionality in climatic conditions
  • robust and reliable design of the unit

Having looked at the Liebherr 250 ton truck crane, the technical characteristics of its performance, the reason for its quality becomes clear. The equipment is highly adaptable to any climate or type of landscape. Now there is no longer a need to order a large number of different equipment, but you can only take advantage of the benefits of one machine. It’s hard to find more multi-tasking equipment than these cranes, so don’t miss the opportunity to rent them.

When the company just started developing this model, it had to solve several problems at once. The first goal was to make such a large crane as maneuverable and fast as possible. The car had to be able to quickly move along ordinary city roads and along dirt clearings in fields and rural areas. For this purpose, we began to develop a new base with a drive. Thanks to him, the Liebherr 250 ton truck crane technical characteristics of the chassis leave competitors far behind. The crane's powerful motor has a turbo diesel operating system, which allows the machine to be used effectively in cold weather. Another goal was to make the machine extremely economical to operate and at the same time extremely versatile. Therefore, a boom is mounted on Liebherr - a telescope with a rise of up to 72 meters above the chassis level. By using the jib, Liebherr 250 ton truck crane, the technical characteristics of the lifting part can be increased by 2 times. If these options are not enough, then rent one of our cranes with lattice boom tracks. All special equipment in our fleet is modern and meets production standards.

The machine is controlled from the on-board computer, which is located in the operator's cabin. There are also built-in systems for controlling the extension of the boom and steel supports to the required length. The crane operator has complete control over the crane - all its main systems and operating functions. When equipment operates in close proximity to power lines, it is possible to delimit the working area according to coordinate systems. The cabin is equipped with a special adjustable seat, air conditioning and heating and large glass for better visibility. In such a machine, the operator can work efficiently and efficiently even for a long time. This model is extremely sensitive to control, so a specially trained operator is required. Our office will offer you an amazing HR department, only the best operators. Our drivers have more than 3.5 years of experience in operating Liebherr cranes of the corresponding class. They are familiar with all the features of the models and their advantages, and use them to achieve maximum results.

Liebherr truck crane 250 tons technical characteristics and data
Boom lifting capacity, tons. 250
Load lifting height, m. 72
Max. hook lift, m. 135
Base dimensions, m. 17.68 x 3.04 x 4.02
Mass of equipment, etc. 72
Wheel formula 12 x 8 x 10
Ballasts, etc. 75


Dimensions of the Liebherr LTM 1250 crane


Load-height diagram of the crane boom LTM 1250
Our company offers everyone comfortable conditions for renting construction vehicles. You can rent a car for a few hours or even for many shifts at a very comfortable price. Therefore, you won’t even have to pay a lot of money for using it over a long period. On the contrary, we will provide a discount. You just need to apply for services at the time you need, because our work is on a 24/7 schedule every day.

More opportunities when renting equipment from us:
  • order special transport for 35% cheaper
  • rent equipment for the required time
  • We prepare a service agreement in 10 minutes.
  • delivery is carried out to Moscow and the region
  • We will provide a crane operator immediately
  • no overpayments
    for equipment
  • consultations
    with specialists
  • we care about our customers
  • high quality special equipment

Device

The truck crane diagram consists of the following elements:

  • automobile chassis (transfer of force from the engine to the propulsion unit for movement and control of vehicles);
  • pump drive (for rotating the internal combustion engine);
  • support frame;
  • hydraulic equipment (to control the flow of working fluid and change or maintain the required values ​​of pressure and fuel flow);
  • fuel tank;
  • rotating connection (connects the elements of the hydraulic and pneumatic control system);
  • telescopic boom (for smooth changes in length with working load);
  • hydraulic cylinder for changing the boom angle;
  • swivel mechanism;
  • lifting mechanism winch;
  • operator's cabin with controls and instruments;
  • electrical equipment with safety system;
  • counterweight.

Mechanisms and hydraulic equipment are located on a rotating platform; they are covered with a casing. The torque that is developed by the engine is transmitted through the PTO to the gearbox of the automobile chassis and the driveshaft to the pump.

Advantages and disadvantages of technology

Among the advantages of this model of truck crane are:

  • maintainability: all spare parts and components are freely available, which helps reduce the time spent on repairs;
  • good maneuverability and compactness: due to the fact that the unit does not weigh so much (compared to similar models from other manufacturers), it is easy to operate;
  • the small width helps to perform the required operations on narrow city streets;
  • the equipment is assembled in accordance with the requirements of GOST of the Russian Federation, as well as according to international standards;
  • it is possible to rotate the structure further than similar models of truck cranes;
  • comfortable operator's cabin with increased visibility;
  • rigid installation of the boom, which enhances its reliability and service life;
  • the equipment operates even in low temperature conditions (down to -40°C) and in gusty wind conditions (up to 40 m/s);
  • high level of carrying capacity and cross-country ability.

The disadvantages include the cost of this equipment, expensive maintenance and the high cost of the repair kit.

Rating
( 2 ratings, average 5 out of 5 )
Did you like the article? Share with friends:
Для любых предложений по сайту: [email protected]